ALFAGTV6.COM

Hi all Just letting all the fellow Alfetta enthusiasts know of our Ebay store if you haven't already come across it. We are based in Tasmania, and we race, restore, buy and sell Alfetta GTV's and sedans. We have many parts for early and late gtv, sedan, 75, 33 and other models. If it's not on the st...

Thanks for your interest Mats (owner of the vehicle here) The car has a twinspark box however I think the housing is original. It has done 3-4 tarmac rallys with no change of setup. There has always been a vibration especially at high revs in first and second. Clutch is definately v6. Do you think a...

I just put ZENDER Sports on mine....seems to work ok

Hi John/MD Thanks both for the info. I believe the offsets of the original stock gtv6 wheels are 40 and that people here generally suggested wheels with 35 offset if they are wanting 7-8 inch width. With et 17, the outer width is an extra 48mm (if my original offset info is correct) compared to 30mm...

Hi
Does anyone think I'd be able to fit the following wheels to my GTV6? I think they were originally for a 75. Im concerned with the offset!

ZEN SPORT 16X8.0 5/98 ET17

Great thanks. It doesn't sound like too much trouble

Hi I've read extensively (thanks to all who have contributed) about the issues of putting a 75 TS transaxle into a GTV6 and plan on doing this to benefit from the better gear ratios and LSD. I am wanting however to install the GTV6 trans into the 75 and use the car as a daily driver. I'm assuming th...

Who would have believed Hobart is drier (2nd driest capital in Aus actually) I must be very lucky.

Rust??? What's that? Fortunately I don't have to worry about such things in Aus. Thanks for the advice. I'll just remove the sections at the rear and treat with POR 15. I'll be able to keep an I on it anyway as the'll be no insulation or carpet covering when I'm finished with the race prep. Thanks a...

Hi I'm removing the sound deadening rubber from the floor pan with dry ice and wondering whether to continue around the areas where the rubber bonding has been injected around the panel seems near the rear wheel arches (inside) and transmission tunnel. Does this material serve any purpose? Could I s...