ALFAGTV6.COM

Evert wrote:Turbo's + up and downpipes are sold.
Motec still for sale
Engine still for sale
Brakes still for sale

Motec Sold/

Engine and Brakes still for sale

Turbo's + up and downpipes are sold.
Motec still for sale
Engine still for sale
Brakes still for salen

I'm quitting with the project.
The engine is in the car, the wiring is done.
There is a Mondeo V6 Turbo programme copied in the computer.

So almost finished, but I just lost my spirit.

Also for sale GTV6 3.1. See the cars for sale section.

Up...

I 'am splitting the engine. The MOTEC M600 goes for €2500,- include shipping cost. http://www.motec.com/m600/m600overview AP 6 piston brakes. € 1250, (have to check the shipping costs) 2 brakes 6 piston AP-racing DTM en 4 disk. Nearly new Disk diameter 330 mm, thickens: 32 mm. AP Racing CP 5555- 817...

It's in the car....
Needs some adjustments but will run in a few months now.

I really like these rims.


Someone knwos which rims there are?

Old Pics http://i32.tinypic.com/16703gg.jpg http://i29.tinypic.com/vy2npf.jpg http://i27.tinypic.com/2u619wo.jpg Newer pics... the green one! http://i38.tinypic.com/2emommt.jpg http://i36.tinypic.com/dgq89g.jpg http://i36.tinypic.com/rh3no1.jpg http://i36.tinypic.com/2v8n4aa.jpg The new ones at home...

So working trough this thread... What's the final verdict? Not a new Motec I hope. Way to expensive for a problem like this. I bought a Motec M6 for my biturbo project. Then a good ECU is needed. I also have a GTV6 3.1 with the stock Bosch J-tronic. I hate the combination so I am very interested in ...

It's on the roll again, The engine has had some maintenance and internal cleaning. All of teh oil lines are mounted. The Motec programs are loaded, The wiring is complete now. New wideband Lambda sondes will be delivered soon. Also an extra gearbox, you never know what will happen. The connection ca...

Does anyone has some more info on how to install an oil cooler and thermostat on an GTV 6 3.1? Just found some summier info: http://alfagtv6.com/phpBB3/viewtopic.php?f=2&t=3257&p=32793&hilit=oil+cooler+thermostat#p32793 Of course I use an oil cooler (13-row unit) along with a thermostati...

Whel why this re-introduction. The bi-turbo project is going as slow as ***** upon a hill. There is still someone working on it a few hour a month. But I gave up the illusion it would be ready this year. But there is also good news. There is a new member in the family. Its A GTV6 3 liter. It need a ...

i used a set of 164 injectors and rails on a 75 style inlet. just needed to make a few dents in the rail to clear the intake runners. the rubbers and metal holding plates from the old style injectors can be swapped over to the newer style injectors. this clamps the injectors in place on the undersi...

what I mean was the 12v runners and fuel rails. Makes it a breeze to fit the o-ring injectors Why do I need the 164 runners? Won't it fit with the standard 75 plenum and runners? I still have the standard 75 plenum made fit for the compressed air and runners. If I use the 164 Runners this mean I go...

Hello Guys, I got a further question. The six red Bosch Volvo 0280150431 injectors look very alike the green ones. So without the flexible connections as in the standard Alfa V6 0280150105 injectors. Can I make the flexible connections also on these injectors or should I customize two Volvo injecto...