Search found 10 matches

by LukeC
Tue Sep 25, 2018 12:37 am
Forum: Engine
Topic: Cold Air Intake
Replies: 19
Views: 14768

Re: Cold Air Intake

And one more...
by LukeC
Tue Sep 25, 2018 12:36 am
Forum: Engine
Topic: Cold Air Intake
Replies: 19
Views: 14768

Re: Cold Air Intake

Sorry for the slow reply.. Up to my eyeballs with non-car stuff, and then I went to upload some pics (too large). Bl**dy Windows had got rid of Paint for some unusable cr*p called Paint 3D. I had to work out how to get it back so I could resize the pics.

Engine has run, but loom is out to tidy up.
by LukeC
Thu Sep 13, 2018 3:22 pm
Forum: Engine
Topic: Cold Air Intake
Replies: 19
Views: 14768

Re: Cold Air Intake

With a small bit of massaging, the 75 Air cleaner will fit under the bonnet of a GTV. They are essentially the same.

I have done this a few times. My 3.2 is using a 3L air box (larger intake - very close to the OE intake), but with extra intake area forward of the splash guard.
by LukeC
Sun Sep 09, 2018 9:02 pm
Forum: Fuel, Electrical & ignition (stock Bosch)
Topic: Busso V6 3.2 24v Coil Pack
Replies: 24
Views: 17328

Re: Busso V6 3.2 24v Coil Pack

Haltec HPI 6. I am not getting a home signal. I am not completely sure on the Signal, Power and Ground pins on the cam angle sensor (May be stuffed). I ave two, and they both test the same with a multi meter. If you know, can you post (i.e. Red...., Green.... and Yellow....). The plug is the same as...
by LukeC
Sun Sep 09, 2018 3:23 pm
Forum: Fuel, Electrical & ignition (stock Bosch)
Topic: Busso V6 3.2 24v Coil Pack
Replies: 24
Views: 17328

Re: Busso V6 3.2 24v Coil Pack

A step closer for me on the weekend. Working through a few issues. When you say "Centre pin in ground", do you mean grounded to engine or trigger? I am using the injector and coil harness off a 166. On this harness, power goes to the pole you have circled in red, green (centre) is earthed ...
by LukeC
Wed Sep 05, 2018 11:46 pm
Forum: Fuel, Electrical & ignition (stock Bosch)
Topic: Busso V6 3.2 24v Coil Pack
Replies: 24
Views: 17328

Re: Busso V6 3.2 24v Coil Pack

Does anyone know the pin out of the 24v coil pack?
Give me a few days. I have to lift the coil cover on Sunday for start. To get the base timing for #1, I am going to rig a dummy coil up to connect to the harness. I need to know exactly this myself.
by LukeC
Wed Sep 05, 2018 10:50 pm
Forum: Engine
Topic: 24V cam angle sensor
Replies: 7
Views: 5175

Re: 24V cam angle sensor

The original Bosch coils with the Haltec igniter. Any comments or advice?
by LukeC
Sun Sep 02, 2018 1:54 am
Forum: Engine
Topic: 24V cam angle sensor
Replies: 7
Views: 5175

Re: 24V cam angle sensor

Thanks heaps. Got it cranking over today, so will double check the polarity of a Crank sensor wiring.

Will be awesome to hear it running after 2 1/2 years of collecting bits.

I should start a new thread of my own to show the car.
by LukeC
Sat Sep 01, 2018 2:07 pm
Forum: Engine
Topic: 24V cam angle sensor
Replies: 7
Views: 5175

Re: 24V cam angle sensor

Just stumbled on this and thought I could get some info to help me though a roadblock. At the pointy end of a 3.2 install to a '86 GTV. Using a Haltec Elite 750. The crank angle sensor I am using is from a 164/twin spark (Am pretty sure they are a reluctor (with a shield). It is already installed so...
by LukeC
Fri Dec 09, 2016 3:18 am
Forum: Suspension, Steering, Wheels, Tires
Topic: steeringpump faillure
Replies: 29
Views: 18812

Re: steeringpump faillure

Hey, I registered here on "Tue Feb 12, 2013 1:52 pm"... Just found this post so I thought I would make my first post here. Thanks killaz for the credit on my post from over on the Alfa BB (Clayton105). Since then, I put A/C on the car in its T-S form... needed the real estate back so went ...