Search found 36 matches
- Mon Apr 16, 2007 7:53 am
- Forum: Gotech Fuel Injection
- Topic: Gotech MFI - No Injector Pulse
- Replies: 9
- Views: 10000
- Mon Apr 16, 2007 4:50 am
- Forum: Gotech Fuel Injection
- Topic: Gotech MFI - No Injector Pulse
- Replies: 9
- Views: 10000
- Sat Apr 14, 2007 7:35 pm
- Forum: Gotech Fuel Injection
- Topic: Gotech MFI - No Injector Pulse
- Replies: 9
- Views: 10000
Gotech MFI - No Injector Pulse
Installing a Gotech MFI on a L-Jet 88 Spider. Running a modified dist with hall sender installed. I have RPM signal and lots of spark. No injector signal!! I have power to both sides of injector connectors, but ECU is not switching ground. Gotech trouble shooting on website is useless. Any ideas?
- Sat Apr 14, 2007 7:25 pm
- Forum: Gotech Fuel Injection
- Topic: Power to Gotech System
- Replies: 43
- Views: 35036
I installed a Gotech in both a GTV6 and Milano. I did away with the combo relay and all the L-jet engine compartment harness. I used a standard bosch type relay with double pin 87 ( not a 87 and 87a). In the remaining connector from the combo relay, you will find the wire for fuel pump, and a switch...
- Wed Mar 07, 2007 3:41 pm
- Forum: Performance
- Topic: Non US spec cam info needed
- Replies: 16
- Views: 11623
Yes, in Harris County, Texas this car is required to pass a dyno style emissions test until it turns 25 years old. We are going to use a Gotech Pro for engine management. If a cam change can be made to improve performance without causing it to fail emissions, then now is the time to make that change...
- Wed Mar 07, 2007 11:00 am
- Forum: Performance
- Topic: Non US spec cam info needed
- Replies: 16
- Views: 11623
CR is 7.5 with Forged 93 mm pistons, stock valves with ported heads. Boost will be limited to 12-15 lbs. The customer originally wanted to use the microfueler system, but later has decided to go with programmable system. The Group 1 cams sound a lot like the Groupe A cams. Do they have very short li...
- Wed Mar 07, 2007 3:47 am
- Forum: Performance
- Topic: Non US spec cam info needed
- Replies: 16
- Views: 11623
Barry, Do you have any basic specs for the Group1 cams? The current thought was to use the S cams for this project. I have the option of stock Verde cams, Groupe A cams, Alquati hot street cams ( a little hotter than S cams ), or these V6 turbo cams. Since this will be a street car (inspected and em...
- Tue Mar 06, 2007 11:50 am
- Forum: Performance
- Topic: Non US spec cam info needed
- Replies: 16
- Views: 11623
The only problem is since this chassis and engine combination were never brought into the US, it is not listed in any of the Alfa technical material. I have asked my suppliers and they do not have anything since this was not available through US sources. Could you point me to a webpage or link that ...
- Mon Mar 05, 2007 6:32 pm
- Forum: Performance
- Topic: Non US spec cam info needed
- Replies: 16
- Views: 11623
- Mon Mar 05, 2007 8:59 am
- Forum: Performance
- Topic: Non US spec cam info needed
- Replies: 16
- Views: 11623
Non US spec cam info needed
Anybody have cams specs for factory cams left and right 60572874 or 60572873 ?
Thanks for your help.
Thanks for your help.
- Thu Nov 16, 2006 1:45 pm
- Forum: Engine
- Topic: Alquati Cams
- Replies: 20
- Views: 13240
I see that I have gotten some traffic on this post. I have a set of used Alquati V6 cams provided by a friend. The only numbers are 43 and 20 ( not sure which number is first ) stamped on the end of each cam. These cams came from a source that only used Alquati products, so I am 99% sure they are in...
- Tue Nov 07, 2006 2:52 pm
- Forum: Engine
- Topic: Alquati Cams
- Replies: 20
- Views: 13240
Alquati Cams
Any one have spec's to Alquati 43-20 cams?
- Tue Nov 07, 2006 2:51 pm
- Forum: Performance
- Topic: Alquati Cams
- Replies: 0
- Views: 2317
Alquati Cams
Any one has access to spec's for a Alquati 43-20 cams?
- Mon Sep 26, 2005 12:06 pm
- Forum: Gotech Fuel Injection
- Topic: GoTech reading accuracy
- Replies: 7
- Views: 9770
- Wed Aug 31, 2005 2:51 pm
- Forum: Gotech Fuel Injection
- Topic: MFI TPS install questions?
- Replies: 22
- Views: 21526