Search found 157 matches

by David
Wed Jan 11, 2017 10:36 pm
Forum: Body (exterior)
Topic: How Time Flies
Replies: 5
Views: 2085

Re: How Time Flies

Murray, It's a bit hard waking up to that view each day but someone has to do it. 35 degrees Celsius here today so send me over a bit of snow or something. The coldest we got here outside last winter was 9 Degrees Celsius. Not even a frost on the ground. There are no rabbits and only a few roos here...
by David
Wed Jan 11, 2017 10:22 pm
Forum: Body (exterior)
Topic: How Time Flies
Replies: 5
Views: 2085

Re: How Time Flies

Darryl,
Yes it is the Zender kit complete with the original Zender mags.
by David
Sat Dec 24, 2016 2:53 am
Forum: Body (exterior)
Topic: How Time Flies
Replies: 5
Views: 2085

How Time Flies

I haven't posted for quite a while but regularly visit and read. It's been quite a number of years since I first started with the GTV6's. Still driving the 3.0L and still enjoying it. Decided to use up some of the new parts I've accumulated over the years and give the GTV6 a refresh. Still running m...
by David
Mon Mar 02, 2015 4:26 pm
Forum: Gearbox, Clutch and Driveshaft
Topic: weird propshaft noise?
Replies: 14
Views: 3995

Re: weird propshaft noise?

A couple of things to check also;

Rear top of the muffler hitting the bolts on the transaxle yoke.

Did you remove the yoke from the transaxle? If so check the nut for proper tensioning.

David
by David
Wed Jan 01, 2014 3:43 am
Forum: MegaSquirt Fuel Injection
Topic: MegaSquirt fuel pump wiring
Replies: 2
Views: 4104

Re: MegaSquirt fuel pump wiring

Hi Jalamari,

Here's a photo & diagram that may help. You need to mount them this way to ensure the fuel pump shuts off if the engines stalls, does not start after a few seconds or if the ignition is on without the engine running.

Regards
David
by David
Wed Aug 21, 2013 3:08 pm
Forum: Fuel, Electrical & ignition (stock Bosch)
Topic: ain't givin up but need help
Replies: 7
Views: 2316

Re: ain't givin up but need help

Hi, If it is only the tacho that is the problem check these connections. Tacho signal is from the coil, a white wire to a connection block on the firewall next to the bonnet catch. Check all connections and cable ends on and around this block. The two white wires on the connection block are connecte...
by David
Tue Aug 20, 2013 11:34 pm
Forum: Fuel, Electrical & ignition (stock Bosch)
Topic: ain't givin up but need help
Replies: 7
Views: 2316

Re: ain't givin up but need help

Hi,

A couple of ECUs I have show the following on pins #28 & #16 as you describe.

ECU Number - 0 280 001 117 - No connectivity

ECU Number - 0 280 001 132 - No connectivity

I can't recall whether the the last ECU was from a GTV6 or Alfa 75 (Milano)

Regards
David
by David
Wed Jul 31, 2013 4:04 am
Forum: MegaSquirt Fuel Injection
Topic: Fuelpump mod. to L-jet
Replies: 1
Views: 2791

Re: Fuelpump mod. to L-jet

Hi /C It's been quite a few years and I'm still running MS on my 3.0L on a 2.2 board. Check these old posts as you need to modify Steve's fuel pump circuit to ensure the fuel pump shuts off if the ignition is on and the engine is not running, stalls, etc. My fix for this on the old 2.2 board is on t...
by David
Tue Feb 05, 2013 2:36 am
Forum: Introduce yourself - Gallery
Topic: Jeroen stelt zich voor. New pictures 21-06-2015
Replies: 55
Views: 15461

Re: Jeroen stelt zich voor.

CONGRATULATIONS !!!
That would have to be the greatest rustoration project I have ever seen on any vehicle.
Most would not have bothered to even try to save it.
Keep up the great work!
David
by David
Thu Mar 22, 2012 11:45 pm
Forum: Body (exterior)
Topic: Windscreen Wipers and Body Plastic
Replies: 12
Views: 4874

Re: Windscreen Wipers and Body Plastic

Wheels are 15" Zenders, I think were fitted when the body kit was fitted. Could even be a dealer fit from new but I'm not sure.



David
by David
Thu Mar 22, 2012 2:07 am
Forum: Body (exterior)
Topic: Windscreen Wipers and Body Plastic
Replies: 12
Views: 4874

Re: Windscreen Wipers and Body Plastic

The body triangles, bottom skirts, front vents, etc were grey from new. Gunmetal or charcoal with the smaller items in black will give plenty of contrast. Get the plastic bits painted in acrylic with plasticizer and they will last a lot longer and have a decent shine on them. Are you fitting the Zen...
by David
Thu Mar 22, 2012 1:22 am
Forum: Cooling system, Heating and Air conditioning
Topic: Radiator swap (75 > GTV6)
Replies: 6
Views: 2819

Re: Radiator swap (75 > GTV6)

The 75 radiator is not a direct fit to the GTV6. The GTV6 does not have a coolant overflow tank or a cap on the radiator. The plastic tank, notorious for cracking, is a pressure tank, directly connected to the radiator, with the radiator cap fitted to it. The plastic tank uses an "air" gap to allow ...
by David
Thu Mar 22, 2012 12:02 am
Forum: Cooling system, Heating and Air conditioning
Topic: Radiator & Thermostat out. Anything else I should do now?
Replies: 6
Views: 2657

Re: Radiator & Thermostat out. Anything else I should do no

Lachy, Most problems I've experienced with GTV6's overheating apart from obvious issues are from engines that have not been overhauled for a considerable time. The engine blocks are usually full of all sorts of crap if they have not been looked after properly. That's where the crud in the radiator c...
by David
Wed Feb 08, 2012 2:10 am
Forum: Site Administration & announcements
Topic: Alfagtv6.com fund raising for 2012
Replies: 26
Views: 7122

Re: Alfagtv6.com fund raising for 2012

Michael,
$10 done.

Regards
David
by David
Tue Dec 29, 2009 3:57 am
Forum: Gearbox, Clutch and Driveshaft
Topic: Alfetta clutch on 75 TS box
Replies: 25
Views: 7077

Re: Alfetta clutch on 75 TS box

Hi Mike, The twin plate and single plate clutches are interchangable on GTV6's, from memory just the slave cylinder push rod may be a different length. A few years ago I had a similar problem with faces for the twin plate clutch. I was told they were available overseas but because they contained ASB...