Search found 1757 matches
- Mon Feb 28, 2005 10:43 pm
- Forum: Fuel, Electrical & ignition (stock Bosch)
- Topic: High RPM sputtering
- Replies: 15
- Views: 11826
High RPM sputtering
Recently my car developed some problems with high RPM sputtering. Power was dead by about 5000 rpm. OK so I had a similar problem a while back. Turned out to be bad Lodge plugs. Put in new NGK BP7ES and gapped it to 0.28mm and all was fine. So I thought the plugs would be a good place to start this ...
- Thu Feb 24, 2005 9:12 am
- Forum: Fuel, Electrical & ignition (stock Bosch)
- Topic: Slow window motors
- Replies: 22
- Views: 18864
There are 4 relays in my engine for the 2 low beams and 2 high beams. Overkill I think. The current draw for the 2 low beams are about 4.3A per beam only. A single relay with a 10 gauge wire should be able to cope easily. Actually 2 relays (1 for both low beams and 1 for both high beams) are plenty ...
Zamani
Jarle,
The idle valve I use is basically the bypass valve in the plenum of the 75/GTV6, not the motronic idler valve. I guess we could start sharing maps. I should be able to dyno the car next week.
The idle valve I use is basically the bypass valve in the plenum of the 75/GTV6, not the motronic idler valve. I guess we could start sharing maps. I should be able to dyno the car next week.
- Mon Feb 21, 2005 10:58 am
- Forum: Performance
- Topic: Mods to DeDion tube
- Replies: 14
- Views: 12541
- Sun Feb 20, 2005 11:02 am
- Forum: Braking
- Topic: Porsche 944 Turbo caliper project
- Replies: 48
- Views: 40896
- Sun Feb 20, 2005 11:00 am
- Forum: Suspension, Steering, Wheels, Tires
- Topic: Race tires
- Replies: 3
- Views: 4019
Hi Mike, I've used the Azenis before. Somehow it has a problem with heat cycles. Once it gets older (maybe after 2-3 track events) and you keep it on the track (in summer) for a few laps, the grip just isn't there anymore. And the grip doesn't seem to come back. Chip also observed the same problem. ...
- Sun Feb 20, 2005 1:30 am
- Forum: Suspension, Steering, Wheels, Tires
- Topic: Race tires
- Replies: 3
- Views: 4019
Race tires
I was initially complaining about the lack of sizes for race tires. Specifically if you use 16" wheels, your tire sizes are limited to 2(which can fit the miniscule wheel arches of the 116 cars). 225/50/16 (almost all manufacturers) 205/45/16 (Kumho V700 ECSTA, Hoosier RS304) The problem with t...
Aha! You must have bought it for a song. Wiring harness all done. Damn good deal I think. I'm going to buy something from him. Actually I bought all sort of stuff from Julian in Singapore (not our Jules in Sydney of course). Jarle, Don't you need a signal for cyl. 1? How are you getting that signal?...
Pancho, Fitting Autronic in a 24V is much easier. You already have the cam sensor. On my car I am using the hall effect sensor (as the home sensor) in the dissy and a flywheel sensor. Why did you go with SM2? A friend in Singapore uses SM2 for his 164S Turbo, but that's because his FWD is a handful ...
- Mon Feb 14, 2005 12:48 pm
- Forum: Introduce yourself - Gallery
- Topic: Zamani
- Replies: 37
- Views: 32900
- Sun Feb 13, 2005 5:54 pm
- Forum: Introduce yourself - Gallery
- Topic: Zamani
- Replies: 37
- Views: 32900
- Sun Feb 13, 2005 5:53 pm
- Forum: Engine
- Topic: 3.0 block and 2.5 crank; will this work?
- Replies: 18
- Views: 14629
- Sun Feb 13, 2005 5:52 pm
- Forum: Performance
- Topic: V6 motor: How is it balanced?
- Replies: 26
- Views: 23720