ALFAGTV6.COM

I checked the circuit boards on rear lights and two or three of the tabs on the input side for the left rear look pretty bad. I used a circuit writer pen which dispenses conductive ink to repair the tab. When I put everything back together, one light worked for a few seconds on application of the br...

This morning I was informed by another motorist that I have no rear brake lights. The one on the rear window is functioning, but the lower ones don't come on at all. All the bulbs look OK and the other lights seem to work. The swtich of the brake pedal arm is connected. While I try to make sense of ...

I checked and cleaned the grounds but that didn't seem to work. However I noticed that when I turn the ignition key an listened to the motor, I hear a hissing noise coming from the fuel pressure regulator. I don't think its suppose to make a sound. Plus I can feel fuel running through the return lin...

I recently had the heads re-done on my 86 GTV-6, which I have to park outside. Since then it has difficulty starting whenever its been sitting for a while and its cold outside. On mornings whens it very cold outdside (near freezing) I've just about given up on trying get it to start, although the mo...

I thought using the accelorator pedal on starts could cause the plenum to blow. But I think I traced the problem to an electrical connection. After squeezing the contacts for the No. 8 fuse together, to improve the contact, the starting problem seems to have gone away. I thought the cold start injec...

After three of lengthy stops in Xmas/ Rush hour traffic (on a cool drizzley day), the red light on my temperature gage came on. I stopped a convienient Starbucks. When the motor was restearted the temperature light came on but went out after the car was motion for a about a minute. Then I noticed st...

My 1986 GTV-6 receintly developed a starting problem. It starts fine when the cold, but frequently after the engine has warmed up, the motor turns over, but it won't start. I'll then let the car sit for a few minutes and try again. Then it usually starts up. This usually occurs after the motor was s...