Megasquirting 16V boxer

Related to the Bowling & Grippo Fuel Injection system.
Post Reply
DaviiD
Silver
Silver
Posts: 2
Joined: Fri Feb 02, 2007 3:57 am
Location: Maribor, Slovenia
Contact:

Megasquirting 16V boxer

Post by DaviiD » Fri Feb 02, 2007 6:50 am

Hi!

I'm currently in the process of megasquirting 33 with 16V boxer. I've been able to get engine running with MS controlling fuel and spark.

http://www.youtube.com/watch?v=Vhbv4XYg ... ed&search=

I'll use LC1 wideband to tune VE map. Because of characteristics of this engine I'll use Hybrid Alpha-N.

Has anyone done this on this engine (it's stock for now). Can anyone provide me with factory (or modified) ignition map ?

Best regards,
David
User avatar
Murray
Verde
Verde
Posts: 622
Joined: Sun Nov 28, 2004 11:16 am
Location: Lac Brome Quebec - Canada

Post by Murray » Fri Feb 02, 2007 2:22 pm

David I can't help you specifically with your 33 engine,but here is an Excel file that allows you to create an ignition map based on a few inputs.I took it off the Megasquirt site and it seems to do a pretty good job.Needless to say,when you're building an ignition map you have to be very carefull to avoid pre-ignition so listen very carefully for "pinging".
Attachments
IgnitionTimingEstimator Modded.xls
(48.5 KiB) Downloaded 437 times
1986-GTV6
1989-75 Twinspark very sadly sold-remarkable sedan !
2014 Audi Q5 3.0l TDI - torque MONSTER
DaviiD
Silver
Silver
Posts: 2
Joined: Fri Feb 02, 2007 3:57 am
Location: Maribor, Slovenia
Contact:

Post by DaviiD » Sun Feb 04, 2007 3:02 pm

Thanks. I'll use that for a starting point then. The problem is that i have kinda noisy exhaust, so I'm not sure that I'll hear pinging (especially at higher RPM - when it becomes dangerous for pistons and connecting rods).
Not only pre-ignition, but detonation is dangerous too.
Post Reply