ALFAGTV6.COM

Mark Mallett · Post by **Mark Mallett** » Wed Feb 23, 2005 8:40 pm

Just ordered a MS kit from Glen's Garage to install on one of my 87 Milanos. Reading through Steve R's GTV6 MS installation page I came across his mention of using magnetic chokes on the radiator fan leads. Does anyone have suggestions on type (possibly part numbers) to use?

Mark

David · Post by **David** » Thu Feb 24, 2005 12:16 am

Mark,

Have a look at this link. It will give you some idea of what to ask for. These seem to do the job and fit the fan cables well,

http://www1.jaycar.com.au/productView.a ... &SUBCATID=

David

Steve R · Post by **Steve R** » Thu Feb 24, 2005 10:12 am

They look very similar to the ones I used, should do the trick fine - Also clean the terminals in the connectors for the fans, that helps too....

Mark Mallett · Post by **Mark Mallett** » Thu Feb 24, 2005 8:13 pm

Thanks David, this gives me a clear idea of what I am looking for.

Will clean the contacts as well while I'm at it Steve.

Found these at mpja.com part number: 15566 FL

Blocks noise. Frequencies from 10MHz to1GHz

Mark

Cooling fan electrical noise.