MegaSquirt fuel pump wiring

Related to the Bowling & Grippo Fuel Injection system.
Post Reply
Jalamari
Silver
Silver
Posts: 2
Joined: Mon Dec 02, 2013 10:52 am

MegaSquirt fuel pump wiring

Post by Jalamari » Wed Dec 18, 2013 11:02 am

I have been working on a megasquirt/l-jetronic mod and i now have some trouble with the fuel pump wiring.

Could someone please check the wiring on the picture below? Note, it is not quite done yet... :mrgreen:
It step 59 of SteveR´s instructions (see link below) that i have trouble with.

Also check the fuel pump wiring diagram, linked below.


Image


http://www.alfagtv6.com/MegaSquirt/MS_l ... _drive.pdf

http://www.alfagtv6.com/MegaSquirt/Megasquirt.htm


Thanks! :wink:
David
Gold
Gold
Posts: 157
Joined: Sun Dec 05, 2004 2:22 am
Location: Dayboro QLD Australia

Re: MegaSquirt fuel pump wiring

Post by David » Wed Jan 01, 2014 3:43 am

Hi Jalamari,

Here's a photo & diagram that may help. You need to mount them this way to ensure the fuel pump shuts off if the engines stalls, does not start after a few seconds or if the ignition is on without the engine running.

Regards
David
Attachments
Fuel Pump wiring 2.JPG
Fuel Pump wiring 2.JPG (46.49 KiB) Viewed 3474 times
Fuel Pump wiring 1.JPG
Fuel Pump wiring 1.JPG (37.13 KiB) Viewed 3474 times
1985 GTV6 3.0 Zender Body Kit - Red
Jalamari
Silver
Silver
Posts: 2
Joined: Mon Dec 02, 2013 10:52 am

Re: MegaSquirt fuel pump wiring

Post by Jalamari » Thu Jan 02, 2014 8:59 am

Hi i already get the car run, but fuel pump spin all the time when the ignition is on. Have to check the wiring. Thank you at the diagram and picture.

Jalamari
Post Reply