Need s some advice on an Alfetta GTV 3.2 V6 24v conversion

Alfaaa1
Gold
Gold
Posts: 56
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: Need s some advice on an Alfetta GTV 3.2 V6 24v conversion

Post by Alfaaa1 » Sun Jan 27, 2019 4:20 pm

Hi Kevin R,
Just tried the standard V6 bonnet and it fits ,
I only need to change the fitting on the injector rail.
When I purchased the throttle bodies AHM did ask me if they were going on an Alfetta GTV.
Attachments
IMG_3456.jpg
IMG_3456.jpg (144.48 KiB) Viewed 206 times
Last edited by Alfaaa1 on Sun Jan 27, 2019 4:41 pm, edited 2 times in total.
Alfaaa1
Gold
Gold
Posts: 56
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: Need s some advice on an Alfetta GTV 3.2 V6 24v conversion

Post by Alfaaa1 » Sun Jan 27, 2019 4:21 pm

Photo
Attachments
IMG_3457.jpg
IMG_3457.jpg (145.71 KiB) Viewed 206 times
Alfaaa1
Gold
Gold
Posts: 56
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: Need s some advice on an Alfetta GTV 3.2 V6 24v conversion

Post by Alfaaa1 » Fri Feb 01, 2019 2:17 pm

Oil dipstick level settings:

On the 3.2 24v V6, I am using the original oil level dipstick that came with the engine, with the modified engine oil sump, where should the oil level marks be on the dipstick. :?:
105gta.
Gold
Gold
Posts: 61
Joined: Fri Oct 23, 2015 4:15 am

Re: Need s some advice on an Alfetta GTV 3.2 V6 24v conversion

Post by 105gta. » Sat Feb 02, 2019 4:15 am

Alfaaa1 I'll be tinkering with my 24v tomorrow. I'll measure the dipstick for you and take a photo. If you fill it to the level on your stick you'll be around 1.5 liters too much. Blow a lot of oil through your intake and smoke out the exhaust.
105gta.
Gold
Gold
Posts: 61
Joined: Fri Oct 23, 2015 4:15 am

Re: Need s some advice on an Alfetta GTV 3.2 V6 24v conversion

Post by 105gta. » Sun Feb 03, 2019 1:40 am

Alfaaa1, so I remembered to check the dipstick for you.
Basically the bottom of the factory stick you have is the low mark and the notch you see in the pic is the full mark.
This will put your oil level 1mm or so below the factory levels.
From the stop on the 24v dipstick its 530mm to the full mark
Having trouble attaching s pic but I'll keep trying but you get the idea...
Alfaaa1
Gold
Gold
Posts: 56
Joined: Tue Feb 02, 2016 10:36 am
Location: Melbourne , Australia

Re: Need s some advice on an Alfetta GTV 3.2 V6 24v conversion

Post by Alfaaa1 » Sun Feb 03, 2019 5:10 am

No Worries 105gta, So approx. how much oil does your sump hold.

It will be great to see your photo :)
Post Reply