Alfetta Berlina v6 conversion & rebuild

Post Reply
LucasM
Silver
Silver
Posts: 1
Joined: Sun Mar 18, 2012 11:02 am
Location: South Africa

Alfetta Berlina v6 conversion & rebuild

Post by LucasM » Sun Jun 24, 2012 4:59 am

Hi Guys

Im currently in the process of rebuilding my alfetta but at the same time in going to be doing a v6 conversion to the car, im just stuck on deciding what size i should put in, currently im looking at the 2.5 24v 156 due to the engine being widely available.

I will however post some pictures on the build/progress 8)
User avatar
Giuliettaevo2
Verde
Verde
Posts: 776
Joined: Sun May 08, 2005 11:56 pm
Location: Netherlands

Re: Alfetta Berlina v6 conversion & rebuild

Post by Giuliettaevo2 » Sun Jun 24, 2012 6:51 am

Hello, welcome here!

There is plenty of information available here on the newer type v6 24v conversion, mostly by Kevin who happens to live in your part of the world also. :mrgreen: :wink:

Fitting the 24v in an Alfetta will be quite a lot of work but it worth it. :) 3.0 is offcourse always nicer then a 2.5.. But probably also more expensive and harder to find. :( The 190bhp from the 156 will definetely put a smile on your face. :D And if you use a short final gearing it will be a nice screamer also. :)

pics are always nice to see... :wink:

greetings Remco
Drive it like you stole it...
squadragrunn
Gold
Gold
Posts: 85
Joined: Sat Jun 18, 2011 1:11 am
Location: netherlands

Re: Alfetta Berlina v6 conversion & rebuild

Post by squadragrunn » Mon Jul 02, 2012 8:54 am

this winter i converted my gtv6 to 3l24v, and its a sh#tload of work!! not to mention al the little things you need to make it happen. not your sunday afternoon tinkeringjob
next time i would go for a tuned 12v 3l ..............
-charles-
gtv6 3.0 24v, 164qv 24v, maserati biturbo 2.8 evo, mb 500se, zzr1100d
Post Reply