Post Reply
User avatar
PietereQ
Platinum
Platinum
Posts: 477
Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL

24V => 12V crankshaft interchangability

Post by PietereQ »

A friend in his 75 3.0 12V track car needs a new crankshaft. Since our shaft cannot be grinded, and availability of nos shafts is null, question is will 24v crankshaft fit in 12V? I know there are some dimensional differences around flywhell flange area what about the rest?
User avatar
Giuliettaevo2
Verde
Verde
Posts: 790
Joined: Sun May 08, 2005 11:56 pm
Location: Netherlands

Re: 24V => 12V crankshaft interchangability

Post by Giuliettaevo2 »

164 style 24v crank will work. Later style is different due to oil pump drive.
Drive it like you stole it...
User avatar
PietereQ
Platinum
Platinum
Posts: 477
Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL

Re: 24V => 12V crankshaft interchangability

Post by PietereQ »

Thanks Remco!
Jim K
Verde
Verde
Posts: 1751
Joined: Tue Nov 30, 2004 12:10 am
Location: Athens,Greece

Re: 24V => 12V crankshaft interchangability

Post by Jim K »

You can also use a later crank like the 3.2 if you machine off the teeth for the oil pump drive. The rear flange where the flywheel fits is as the 3liter.
Image
Jim K.
Post Reply