Alfetta 1800 and 2000 - same bolt pattern in the crank?
Used to know this shit!
-
- Platinum
- Posts: 494
- Joined: Tue Feb 21, 2006 10:05 pm
- Location: Sunny Euro-Brisney
4 cyl flywheels - remind me?
1966 GTV
1982 Suzuki "Bathurst" Katana
1995 Cagiva Mito (race kitted 250 powered)
1982 Suzuki "Bathurst" Katana
1995 Cagiva Mito (race kitted 250 powered)
Re: 4 cyl flywheels - remind me?
Well given that you can transplant any crankshaft into any engine block of the Nord ilk*,it is extremely doubtful that Alfa would have changed the bolt patterns. Re-tooling is a costly business and so my best anticipation is that they are the same.
* Dont expect the stroke to remain the same..
* Dont expect the stroke to remain the same..
Transaxle Alfas Haul More Arse
-
- Gold
- Posts: 85
- Joined: Sat Jun 18, 2011 1:11 am
- Location: netherlands
Re: 4 cyl flywheels - remind me?
nope, 1,6&1.8 use 8bolts 2.0 uses 6bolts (if i'm not mistaken)
-charles-
gtv6 3.0 24v, 164qv 24v, maserati biturbo 2.8 evo, mb 500se, zzr1100d
gtv6 3.0 24v, 164qv 24v, maserati biturbo 2.8 evo, mb 500se, zzr1100d
-
- Platinum
- Posts: 494
- Joined: Tue Feb 21, 2006 10:05 pm
- Location: Sunny Euro-Brisney
Re: 4 cyl flywheels - remind me?
Errrr... yes and no - you can put any of them in any block, but non 2l cranks won't line up with the bores in a 2l block (even with the offset rods), and vice versa.MD wrote:Well given that you can transplant any crankshaft into any engine block of the Nord ilk*,it is extremely doubtful that Alfa would have changed the bolt patterns. Re-tooling is a costly business and so my best anticipation is that they are the same.
* Dont expect the stroke to remain the same..
105 1.6 and 1.8 definitely use 8 bolts, but the alfetta 1.8 crank I think is different cos a 1750 flywheel won't bolt on from memory?squadragrunn wrote:nope, 1,6&1.8 use 8bolts 2.0 uses 6bolts (if i'm not mistaken)
Guess I'm going to have to go digging, got both cranks lying in a corner of the man cave, but can't get at them easily.
1966 GTV
1982 Suzuki "Bathurst" Katana
1995 Cagiva Mito (race kitted 250 powered)
1982 Suzuki "Bathurst" Katana
1995 Cagiva Mito (race kitted 250 powered)
-
- Platinum
- Posts: 494
- Joined: Tue Feb 21, 2006 10:05 pm
- Location: Sunny Euro-Brisney
Re: 4 cyl flywheels - remind me?
And confirmation that Alfetta 1.8 are a 6 bolt crank:
http://www.alfabb.com/bb/forums/engine- ... ments.html
http://www.alfabb.com/bb/forums/engine- ... ments.html
1966 GTV
1982 Suzuki "Bathurst" Katana
1995 Cagiva Mito (race kitted 250 powered)
1982 Suzuki "Bathurst" Katana
1995 Cagiva Mito (race kitted 250 powered)
-
- Platinum
- Posts: 494
- Joined: Tue Feb 21, 2006 10:05 pm
- Location: Sunny Euro-Brisney
Re: 4 cyl flywheels - remind me?
Went digging into my stash last night, and also asked a bloke I know who has a few engines piled in a corner - Alfetta 1.8 is definitely 6 bolt like a 2l.
Case closed.
Case closed.
1966 GTV
1982 Suzuki "Bathurst" Katana
1995 Cagiva Mito (race kitted 250 powered)
1982 Suzuki "Bathurst" Katana
1995 Cagiva Mito (race kitted 250 powered)