Page 1 of 2
v6 3.0 12v rebulid and mild tuning
Posted: Wed Aug 17, 2016 5:42 am
by smukc
Hi
I am rebuliding my v6 and would like to get some extra hp. Which camshafts do you recomends? (posibly regrind) i would like to keep pistons, conrods and valves stock... the car wil be road car and occasional track toy it is 75 with 164 engine
Re: v6 3.0 12v rebulid and mild tuning
Posted: Wed Aug 17, 2016 7:37 am
by Giuliettaevo2
Buy the alfa v6 book from Jim Kartalamakis and enter a world of knowledge about these engines...
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: v6 3.0 12v rebulid and mild tuning
Posted: Wed Aug 17, 2016 8:23 am
by 75evo
Agree with Giuli Evo's advice. Jim K has a lot of info on cam profiles which is suitable for your engine. He knows a good place which can regrind your cams too. Although I would recommend that your compression be increased to about 10.5:1 and heads ported or at least cleaned for the cams to show their worth.
When he comes from his extended getaway with his hot blonde mistress
![Very Happy :D](./images/smilies/icon_biggrin.gif)
, ask him about the cams.
Re: v6 3.0 12v rebulid and mild tuning
Posted: Wed Aug 17, 2016 12:15 pm
by smukc
i have v6 high performance manual
how can i know if the heads were lowered alredy by the previous owner ?
I have 24v intake runners can i use them with 24v adapter plates ( oval intake holes on the side facing head )
For porting head is this simple work ? ( i have expiriance with 2stroke cilinders only
![Laughing :lol:](./images/smilies/icon_lol.gif)
)
Re: v6 3.0 12v rebulid and mild tuning
Posted: Wed Aug 17, 2016 4:50 pm
by Duk
smukc wrote:i have v6 high performance manual
how can i know if the heads were lowered alredy by the previous owner ?
I have 24v intake runners can i use them with 24v adapter plates ( oval intake holes on the side facing head )
For porting head is this simple work ? ( i have expiriance with 2stroke cilinders only
![Laughing :lol:](./images/smilies/icon_lol.gif)
)
Just use the ported 75 runners and modify the 75 plenum chamber to suit.
Well ported the inlet ports will be about 85% of the valve diameter so about 37.5mm.
Having inlet runners that are larger than the ports is basically pointless, so opening the 75 runners up to match the ported ports is all that is needed.
Any adapters would cause excessive turbulence and restrict flow.
And head porting is a crap job................
Even with all the tools you need to do a decent job of it, it's a crap job.
Re: v6 3.0 12v rebulid and mild tuning
Posted: Fri Aug 19, 2016 9:52 am
by smukc
i dont have 75 plenum and intake runners i have only 164 12v and 24v intake runners and plenums.
Is the original ecu ok or should i replace it ?
Re: v6 3.0 12v rebulid and mild tuning
Posted: Sat Aug 20, 2016 12:21 am
by Giuliettaevo2
You're not coming to the alfa spettacolo in the Netherlands next weekend by any chance?
I would be happy to donate you a 75 inlet and runners then.
The 164 12v stuff can be used as well. Just needs the throttlebody repositioned so it clears the bulkhead. The curve from an alfa 75 TS intake works quite well.
Re: v6 3.0 12v rebulid and mild tuning
Posted: Sat Aug 20, 2016 6:02 am
by smukc
i have 164 modified plenum to fit in 75
![Wink :wink:](./images/smilies/icon_wink.gif)
and runners are 38mm so it would perfectly fit ported head
Giuliettaevo2 thx for the offer i am from Slovenia and none of my alfas are working
![Laughing :lol:](./images/smilies/icon_lol.gif)
so i am not coming to alfa spettacolo in the Netherlands
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: v6 3.0 12v rebulid and mild tuning
Posted: Sun Aug 21, 2016 12:53 am
by Duk
smukc wrote:i dont have 75 plenum and intake runners i have only 164 12v and 24v intake runners and plenums.
Is the original ecu ok or should i replace it ?
Unless you have some how implimented the 24v engine management system and can have it tuned to suit your engines wants and needs, go for a decent quality programmable computer. The 12v version of the Motronic is just too compromised in how it did what it was supposed to do.
Re: v6 3.0 12v rebulid and mild tuning
Posted: Wed Aug 24, 2016 8:44 am
by smukc
Guys any sugestions what to do here
pictures of cylinders:
https://www.dropbox.com/sh/gjerhyqbp63o ... yZqoa?dl=0
piston rings were changed before 10kkm ( previous owner )
Re: v6 3.0 12v rebulid and mild tuning
Posted: Tue Sep 06, 2016 2:05 pm
by smukc
Re: v6 3.0 12v rebulid and mild tuning
Posted: Sat Sep 10, 2016 8:50 pm
by zambon
Thats a sad discovery smukc. I hope you can locate a new crank without too much difficulty. Good luck
Re: v6 3.0 12v rebulid and mild tuning
Posted: Mon Sep 12, 2016 3:50 am
by smukc
How about regrind ? is it true that it is nitrated deep enaought to grind it seafely on -0.10 ?
Re: v6 3.0 12v rebulid and mild tuning
Posted: Fri Sep 16, 2016 7:33 am
by gtv-racer
I see you can get bearings in a 0.25mm smaller diameter so i guess it is oke.
Translate it from dutch:
http://www.mijnautoonderdelen.nl/alfa-r ... hoofdlager
Re: v6 3.0 12v rebulid and mild tuning
Posted: Sat Sep 17, 2016 1:38 pm
by 105gta.
If in doubt you can get it re-nitrided and ground. Most competent machine shops will know the process. Usually ground close to require size, then nitrided then back for final grinding to accurate. Not cheap but may be worth it.