Hey all,
I have run into a problem,
We have 4 loose wires coming from the Gotech, but not sure in what order they are plugged into the VR6 coil pack. The wires are yellow, green, orange and purple. Anyone got a picture of how these are meant to be plugged in? Wiring diagram would be very helpful.
Would like to get this done ASAP, I wanna start it
Thanks in advance.
- Mezevenf
- Platinum
- Posts: 231
- Joined: Sat Aug 13, 2005 2:52 am
- Location: Gold Coast, Australia
- Contact:
Wiring to VR6 pack
Bernard M (AKA Mef - Mezevenf)
1986 75QV 3.0L 24v V6 - Silver
1985 GTV6 2.5L 12v V6 - Red
1999 166 3.0L 24v V6 - Red
NightSpec
1986 75QV 3.0L 24v V6 - Silver
1985 GTV6 2.5L 12v V6 - Red
1999 166 3.0L 24v V6 - Red
NightSpec
- Mezevenf
- Platinum
- Posts: 231
- Joined: Sat Aug 13, 2005 2:52 am
- Location: Gold Coast, Australia
- Contact:
Found the pics but the wires are a different color.
Confused, wanna get the car started today!
Confused, wanna get the car started today!
Bernard M (AKA Mef - Mezevenf)
1986 75QV 3.0L 24v V6 - Silver
1985 GTV6 2.5L 12v V6 - Red
1999 166 3.0L 24v V6 - Red
NightSpec
1986 75QV 3.0L 24v V6 - Silver
1985 GTV6 2.5L 12v V6 - Red
1999 166 3.0L 24v V6 - Red
NightSpec
- junglejustice
- Verde
- Posts: 624
- Joined: Fri Nov 26, 2004 1:19 am
- Location: Granolaville, WA
The Golf VR6 coil pack can be used in one of two ways...
1. It has got a built in ignition module as in the picture. Then you use 12v+ ; Signal 1; Signal 2; Signal 3 ; Earth. Gotech must be switched to external fire for this option.
2. You can remove the ignition module, switch the Gotech ecu to internal fire 12v+ ; Signal 1; Signal 2; Signal 3.
1. It has got a built in ignition module as in the picture. Then you use 12v+ ; Signal 1; Signal 2; Signal 3 ; Earth. Gotech must be switched to external fire for this option.
2. You can remove the ignition module, switch the Gotech ecu to internal fire 12v+ ; Signal 1; Signal 2; Signal 3.