Project 2 : front mount SA GTV 3.0 - Sei diff

Alfa Romeo ONLY please!
casta28
Silver
Silver
Posts: 21
Joined: Wed Nov 05, 2014 9:31 am

Re: Project 2 : front mount SA GTV 3.0 - Sei diff

Post by casta28 » Thu Apr 04, 2019 8:20 am

do you have pictures of the new driveshaft with bmw differential?

I've infinite problems with the mix bmw rubber joint/cv rear joint, now we try with double cv joint but now I see you advise against to use it..
KevinR
Platinum
Platinum
Posts: 309
Joined: Sun Mar 20, 2016 2:46 pm

Re: Project 2 : front mount SA GTV 3.0 - Sei diff

Post by KevinR » Mon Apr 15, 2019 3:20 pm

I'm still using the sedan diff in my car with a one pice prop of 850mm long with two CV and a torsion resilient tube with no problems and perfectly smooth. I had problems when I had universals as the angles were greater than 3degrees and off in both planes . This is my prop
Attachments
image.jpeg
image.jpeg (122.28 KiB) Viewed 24 times
image.jpeg
image.jpeg (121.77 KiB) Viewed 24 times
KevinR
Platinum
Platinum
Posts: 309
Joined: Sun Mar 20, 2016 2:46 pm

Re: Project 2 : front mount SA GTV 3.0 - Sei diff

Post by KevinR » Mon Apr 15, 2019 3:30 pm

This is my friend's car who has used my flywheel and clutch set up with same ZF box as mine. He has used the X5 3.0 diesel prop with CV at back , rubber at front . No problems at all.
Attachments
image.jpeg
image.jpeg (76.94 KiB) Viewed 24 times
image.jpeg
image.jpeg (121.69 KiB) Viewed 24 times
image.jpeg
image.jpeg (97.5 KiB) Viewed 24 times
Post Reply