Project 2 : front mount SA GTV 3.0 - Sei diff

Alfa Romeo ONLY please!
casta28
Silver
Silver
Posts: 21
Joined: Wed Nov 05, 2014 9:31 am

Re: Project 2 : front mount SA GTV 3.0 - Sei diff

Post by casta28 » Thu Apr 04, 2019 8:20 am

do you have pictures of the new driveshaft with bmw differential?

I've infinite problems with the mix bmw rubber joint/cv rear joint, now we try with double cv joint but now I see you advise against to use it..
KevinR
Platinum
Platinum
Posts: 432
Joined: Sun Mar 20, 2016 2:46 pm

Re: Project 2 : front mount SA GTV 3.0 - Sei diff

Post by KevinR » Mon Apr 15, 2019 3:20 pm

I'm still using the sedan diff in my car with a one pice prop of 850mm long with two CV and a torsion resilient tube with no problems and perfectly smooth. I had problems when I had universals as the angles were greater than 3degrees and off in both planes . This is my prop
Attachments
93237C64-3E68-4FC0-860D-F9310E4F107F.jpeg
93237C64-3E68-4FC0-860D-F9310E4F107F.jpeg (117.59 KiB) Viewed 259 times
B5ADA9CC-BC1C-4852-A1E3-418EDCA99CF2.jpeg
B5ADA9CC-BC1C-4852-A1E3-418EDCA99CF2.jpeg (131.53 KiB) Viewed 259 times
image.jpeg
image.jpeg (122.28 KiB) Viewed 471 times
image.jpeg
image.jpeg (121.77 KiB) Viewed 471 times
Last edited by KevinR on Sat May 25, 2019 2:09 pm, edited 1 time in total.
KevinR
Platinum
Platinum
Posts: 432
Joined: Sun Mar 20, 2016 2:46 pm

Re: Project 2 : front mount SA GTV 3.0 - Sei diff

Post by KevinR » Mon Apr 15, 2019 3:30 pm

This is my friend's car who has used my flywheel and clutch set up with same ZF box as mine. He has used the X5 3.0 diesel prop with CV at back , rubber at front . No problems at all.
Attachments
image.jpeg
image.jpeg (76.94 KiB) Viewed 471 times
image.jpeg
image.jpeg (121.69 KiB) Viewed 471 times
image.jpeg
image.jpeg (97.5 KiB) Viewed 471 times
KevinR
Platinum
Platinum
Posts: 432
Joined: Sun Mar 20, 2016 2:46 pm

Re: Project 2 : front mount SA GTV 3.0 - Sei diff

Post by KevinR » Sat May 25, 2019 2:26 pm

On the previous page I was working on the dash and heater unit. I have finally got my heater bracket made . Can’t help myself by putting and Alfa badge on it even though it’s under the dash and no one will eve see it 😂😂😂
Attachments
7D9AA836-E728-46A6-9E6D-4FB89D06FB4E.jpeg
7D9AA836-E728-46A6-9E6D-4FB89D06FB4E.jpeg (22.5 KiB) Viewed 257 times
00DFA784-69AB-4763-9465-E41DD0E65F49.jpeg
00DFA784-69AB-4763-9465-E41DD0E65F49.jpeg (132.32 KiB) Viewed 257 times
4F94C19F-26D4-4090-B122-F9C1D33EADA7.jpeg
4F94C19F-26D4-4090-B122-F9C1D33EADA7.jpeg (124.84 KiB) Viewed 257 times
A2786412-156D-49CB-B8AC-EDD8653A400A.jpeg
A2786412-156D-49CB-B8AC-EDD8653A400A.jpeg (135.29 KiB) Viewed 257 times
KevinR
Platinum
Platinum
Posts: 432
Joined: Sun Mar 20, 2016 2:46 pm

Re: Project 2 : front mount SA GTV 3.0 - Sei diff

Post by KevinR » Sat May 25, 2019 2:40 pm

My dash is in .. thanks again to Richard for flocking it . Waiting for my fuel sender gauge to fill vacant hole .
Slow progress as many projects on go but should be ready for trackday next month ! Thinking dash looks better so car should go faster :wall:
Attachments
DE05DC76-D1C0-419D-8C18-5991F4AD5E4D.jpeg
DE05DC76-D1C0-419D-8C18-5991F4AD5E4D.jpeg (111.05 KiB) Viewed 256 times
FD877FF4-B634-4DA2-83E9-3B8F2C841504.jpeg
FD877FF4-B634-4DA2-83E9-3B8F2C841504.jpeg (108.38 KiB) Viewed 256 times
2F257E4A-5368-4869-91EB-DFF2F9CE525F.jpeg
2F257E4A-5368-4869-91EB-DFF2F9CE525F.jpeg (50.68 KiB) Viewed 256 times
846A2F71-B4AB-420E-A8D4-F5D8361F7656.jpeg
846A2F71-B4AB-420E-A8D4-F5D8361F7656.jpeg (138.89 KiB) Viewed 256 times
4C28860E-DFC2-4E85-9731-86B7F1104991.jpeg
4C28860E-DFC2-4E85-9731-86B7F1104991.jpeg (135.28 KiB) Viewed 256 times
Post Reply