Thing worth noting about rear rotors
Posted: Fri Aug 22, 2008 3:42 am
Note the thickness whrere disk meets the diff flange and cv joint flange:
Sorry for the quality of the pics, but it's my always-handy cell which has meet the ground far too many times...
Anyway difference between the two is 3mm
So if you re tightening that bolts and that rotor is still loose... Well buy a proper thicker rotor or grind off some material from the CV flange
Sorry for the quality of the pics, but it's my always-handy cell which has meet the ground far too many times...
Anyway difference between the two is 3mm
So if you re tightening that bolts and that rotor is still loose... Well buy a proper thicker rotor or grind off some material from the CV flange