Hi,
I've searched the forum, but can't find a thread covering this topic.
My original ignition switch / ignition barrel is dead, so I've bought a replacement.
My problem is that I can't get the old one out.
I can't really see any screws that holds the ignition barrell, but it might be hidden away somewhere.
Do I use brute force to remove the old ignition barrel/switch, or have I missed something?
All help appreciated
Removing ignition switch / ignition barrel -- Help
Alfa Romeo - The thinking man's car!
--------------------------------------------
2004 Alfa Romeo Sportwagon 1.9 JTD
1986 Alfa Romeo GTV6 2.5
--------------------------------------------
2004 Alfa Romeo Sportwagon 1.9 JTD
1986 Alfa Romeo GTV6 2.5
Dan on the "backside" -closest to the dash there is a bolt which holds the barrel in the column.This bolt had a breakaway head when it was first installed so there's nothing to grab ahold of.Best bet is to use a cutting wheel (Dremel) and cut a slot in the end so that you can use a slot-head screwdriver to turn it out.This bolt is close to the column and is hard to see so your best bet is to use a mirror.
1986-GTV6
1989-75 Twinspark very sadly sold-remarkable sedan !
2014 Audi Q5 3.0l TDI - torque MONSTER
1989-75 Twinspark very sadly sold-remarkable sedan !
2014 Audi Q5 3.0l TDI - torque MONSTER