User avatar
Evert
Gold
Gold
Posts: 60
Joined: Mon Jan 21, 2008 3:40 am

Re: 3.0 V6 12V Twin Turbo

Post by Evert »

Need som injectors for the project.

Bosch: Anything between
From 328cc to 394cc.

The more the better.

Anyone knows an adress, I preffer England.
User avatar
Evert
Gold
Gold
Posts: 60
Joined: Mon Jan 21, 2008 3:40 am

Re: 3.0 V6 12V Twin Turbo

Post by Evert »

Evert wrote:Need som injectors for the project.

Bosch: Anything between
From 328cc to 394cc.

The more the better.

Anyone knows an adress, I preffer England.
Or a Bosch code table would be very helpfull..
User avatar
scott.venables
Gold
Gold
Posts: 117
Joined: Wed Nov 01, 2006 11:00 pm
Location: Melbourne, Australia

Re: 3.0 V6 12V Twin Turbo

Post by scott.venables »

User avatar
Mats
Verde
Verde
Posts: 4059
Joined: Mon Nov 29, 2004 12:26 am
Location: Gothenburg, Sweden
Contact:

Re: 3.0 V6 12V Twin Turbo

Post by Mats »

Volvo R injectors (Green), 365cc. Available cheap everywhere. :)
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-

GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
User avatar
Giuliettaevo2
Verde
Verde
Posts: 790
Joined: Sun May 08, 2005 11:56 pm
Location: Netherlands

Re: 3.0 V6 12V Twin Turbo

Post by Giuliettaevo2 »

Drive it like you stole it...
User avatar
Evert
Gold
Gold
Posts: 60
Joined: Mon Jan 21, 2008 3:40 am

Re: 3.0 V6 12V Twin Turbo

Post by Evert »

Giuliettaevo2 wrote:http://www.marktplaats.nl :wink:
You mean this one??
http://link.marktplaats.nl/238440687
Looks a bit to small.

Code is: 0 280 155 733

http://www.bosch-motorsport.de/pdf/comp ... s/EV_6.pdf
261,2 g/min

Code origional is:
Code is: 0 280 155 105
Last edited by Evert on Thu Apr 16, 2009 2:06 am, edited 1 time in total.
User avatar
Evert
Gold
Gold
Posts: 60
Joined: Mon Jan 21, 2008 3:40 am

Re: 3.0 V6 12V Twin Turbo

Post by Evert »

Mats wrote:Volvo R injectors (Green), 365cc. Available cheap everywhere. :)
Do you mean this one:
B 280 431 129

of the same sheet:
http://www.bosch-motorsport.de/pdf/comp ... s/EV_6.pdf
User avatar
Mats
Verde
Verde
Posts: 4059
Joined: Mon Nov 29, 2004 12:26 am
Location: Gothenburg, Sweden
Contact:

Re: 3.0 V6 12V Twin Turbo

Post by Mats »

I have no idea, sold the ones I had and replaced them with Siemens 620cc units. 8)

Edit, these are the ones.
Bosch nr: 0280 155 968
420-427cc @3 bar
465cc@3,8 bar
Attachments
Green Volvo R injectors
Green Volvo R injectors
volvo-r.jpg (33.59 KiB) Viewed 7620 times
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-

GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
User avatar
Giuliettaevo2
Verde
Verde
Posts: 790
Joined: Sun May 08, 2005 11:56 pm
Location: Netherlands

Re: 3.0 V6 12V Twin Turbo

Post by Giuliettaevo2 »

http://link.marktplaats.nl/240113564

Just search a bit and find things like these... :wink:
Drive it like you stole it...
User avatar
Evert
Gold
Gold
Posts: 60
Joined: Mon Jan 21, 2008 3:40 am

Re: 3.0 V6 12V Twin Turbo

Post by Evert »

Giuliettaevo2 wrote:http://link.marktplaats.nl/240113564

Just search a bit and find things like these... :wink:
Are you sure they fitt?

I can make a good deal with the seller.
What the heck, I just bought them. Hopefully one step closer.
User avatar
rz
Platinum
Platinum
Posts: 390
Joined: Mon Jan 17, 2005 2:23 pm
Location: belgium

Re: 3.0 V6 12V Twin Turbo

Post by rz »

there are only 4 of them??
is that right 12 ohm?
User avatar
Evert
Gold
Gold
Posts: 60
Joined: Mon Jan 21, 2008 3:40 am

Re: 3.0 V6 12V Twin Turbo

Post by Evert »

rz wrote:there are only 4 of them??
is that right 12 ohm?
4 is more than enough.

I'll drill extra holes for the other 2 cylinders and use two of the old injectors.
Two of the old injectors should equalize with one of the new injectors for the fuel flow.







Just joking, bought 6 of those red guys.

Thanks Giuliettaevo2 and Mats for the advice!
User avatar
Evert
Gold
Gold
Posts: 60
Joined: Mon Jan 21, 2008 3:40 am

Re: 3.0 V6 12V Twin Turbo

Post by Evert »

Hello Guys,
I got a further question.

The six red Bosch Volvo 0280150431 injectors look very alike the green ones.

So without the flexible connections as in the standard Alfa V6 0280150105 injectors.

Can I make the flexible connections also on these injectors or should I customize two Volvo injectorrails for them?
User avatar
Mats
Verde
Verde
Posts: 4059
Joined: Mon Nov 29, 2004 12:26 am
Location: Gothenburg, Sweden
Contact:

Re: 3.0 V6 12V Twin Turbo

Post by Mats »

Evert wrote:Hello Guys,
I got a further question.

The six red Bosch Volvo 0280150431 injectors look very alike the green ones.

So without the flexible connections as in the standard Alfa V6 0280150105 injectors.

Can I make the flexible connections also on these injectors or should I customize two Volvo injectorrails for them?
Just use parts from a 164 engine to make it accept O-ring injectors. Simple and much better then the barbed ones.
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-

GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
User avatar
Evert
Gold
Gold
Posts: 60
Joined: Mon Jan 21, 2008 3:40 am

Re: 3.0 V6 12V Twin Turbo

Post by Evert »

Mats wrote:
Evert wrote:Hello Guys,
I got a further question.

The six red Bosch Volvo 0280150431 injectors look very alike the green ones.

So without the flexible connections as in the standard Alfa V6 0280150105 injectors.

Can I make the flexible connections also on these injectors or should I customize two Volvo injectorrails for them?
Just use parts from a 164 engine to make it accept O-ring injectors. Simple and much better then the barbed ones.
Thanks Mats,
But I can get my hands on the 164 12V injectors and the 24V injectors.
There seems to be a difference.
Post Reply