Please post a pic of yourself or your car tell us about yourself and let us know where you are from.
User avatar
Mats
Verde
Verde
Posts: 4059
Joined: Mon Nov 29, 2004 12:26 am
Location: Gothenburg, Sweden
Contact:

Re: GTV6 Zender

Post by Mats »

PietereQ wrote:Yes, no balls no glory Mats, I just have found a perfect seat for my gtv6, harness angle problem - solved: :D
The shoulder straps anyway...
But I think I'm not the only one wondering, is it wide enough? :lol:
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-

GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
User avatar
ar4me
Verde
Verde
Posts: 645
Joined: Fri Dec 03, 2004 9:55 am
Location: Southern California

Re: GTV6 Zender

Post by ar4me »

Suppose we can conclude that Pete is wider than he is tall... :lol: :wall: Love your new seat, even comes with mounting rail.
87 Milano Verde - daily driver - Juliet
87 Milano 3.0 Motronic - budget race car - Roxanne
87 Milano 3.7 24v - race car
(Repeat or do as I say at your own risk - be critical)
User avatar
PietereQ
Platinum
Platinum
Posts: 477
Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL

Re: GTV6 Zender

Post by PietereQ »

Finally home :) Dropped the car in my garage yesterday at midnight.

Image




Since last pics were still work in progress here are few pics of finished job, some rust due to high humidity:

Image

Image

Upper structure...
Image


Few closeups...

Image

Image



And now TO DO LIST:

-Seam welding (and I'll have a few questions about it for you guys)
-buy some dry ice and remove all that bitumen from the car
-paint the interior
-get hold of lightweight dash
-install new brake lines, brake bias valve
-make brackets, adapters for front coilovers
-overhaul (again :evil: ) rear calipers
-lightweight windows
-drop the engine and propshaft in and ready to go
-And new seat.... uhm hey I forgot I already have one :lol:
User avatar
Giuliettaevo2
Verde
Verde
Posts: 790
Joined: Sun May 08, 2005 11:56 pm
Location: Netherlands

Re: GTV6 Zender

Post by Giuliettaevo2 »

nice bundle of pipes you have there.. :shock:

If you go for a hydraulic handbrake you can use 105 series rear calipers. :wink: They are exactly the same, only they lack the handbrake system and don't need adjusting.. :)
Drive it like you stole it...
User avatar
Mats
Verde
Verde
Posts: 4059
Joined: Mon Nov 29, 2004 12:26 am
Location: Gothenburg, Sweden
Contact:

Re: GTV6 Zender

Post by Mats »

Giuliettaevo2 wrote: ...use 105 series rear calipers. :wink: They are exactly the same, only they lack the handbrake system and don't need adjusting.. :)
Really??

Now that's interesting! :shock:

Edit, front or rear 105?
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-

GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
User avatar
Maurizio
Verde
Verde
Posts: 680
Joined: Wed Dec 01, 2004 4:49 am
Location: the Netherlands, 153.1km from the N'ring :-)

Re: GTV6 Zender

Post by Maurizio »

Mats, the rear's of the 105 are the straight fit!
Even the pads are the same :lol:
Banned.. ? ;-) Daily donky.. ==> BMW 325d Image
E36M3 (3.0) Ringtool :twisted: ==> definitely BANNED!

AR 75 TS Ringtool '90, AR Spider 2000 veloce '79
User avatar
Mats
Verde
Verde
Posts: 4059
Joined: Mon Nov 29, 2004 12:26 am
Location: Gothenburg, Sweden
Contact:

Re: GTV6 Zender

Post by Mats »

Now you tell me?? :shock:
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-

GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
User avatar
Maurizio
Verde
Verde
Posts: 680
Joined: Wed Dec 01, 2004 4:49 am
Location: the Netherlands, 153.1km from the N'ring :-)

Re: GTV6 Zender

Post by Maurizio »

Mats wrote:Now you tell me?? :shock:
:? always though you guys (and the rest of the world) already was aware of this race (because no handbrake) upgrade....
Banned.. ? ;-) Daily donky.. ==> BMW 325d Image
E36M3 (3.0) Ringtool :twisted: ==> definitely BANNED!

AR 75 TS Ringtool '90, AR Spider 2000 veloce '79
User avatar
PietereQ
Platinum
Platinum
Posts: 477
Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL

Re: GTV6 Zender

Post by PietereQ »

Ok I have again bunch of questions to you engineering heads out there...

First, im planning of using uniballs in upper a-arms, in place of stock rubber bushings. Thing is in stock version the load is evenly distributed on the shock tower bolt via the bushing sleeve - that is 50mm. The only spherical bearings i could find have puny width of 12mm, just like here:
Image

Uploaded with ImageShack.us

I'm afraid that due to this the bolt is likely to be bent under load. I've been told that using sleeves on both sides of the joint together with the clamping force on the bolt should be enough to get the job done. BS or not? Because I'm not fully convinced.

I was originally thinking of such "extended" uniball:
Image
Yet no luck in finding any such like these.

Any ideas?
User avatar
PietereQ
Platinum
Platinum
Posts: 477
Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL

Re: GTV6 Zender

Post by PietereQ »

Ok I understand that silence is "yes" as far as the previous question is concerned.

Here's another one, especially to you guys racing in temperate climate. Do you ditch your heaterboxes? It's a few kgs, yet how to fight with foggy windscreen od humid/rainy days, will just an electric fan will be fine?
User avatar
Micke
Verde
Verde
Posts: 810
Joined: Sun Dec 05, 2004 11:33 pm
Location: Finland
Contact:

Re: GTV6 Zender

Post by Micke »

I threw mine away. Quite a lot of weight.
I have a small electric fan for the sake of rules. Weighs 600 g or so.
For visibility I use an anti fog chemical. Works fine.
If you don't mind spending the cash the best option is a heated windshield.
User avatar
MD
Verde
Verde
Posts: 2544
Joined: Mon Nov 22, 2004 2:37 am
Location: Brisbane, Australia
Contact:

Re: GTV6 Zender

Post by MD »

Hey Micke, how do you get rid of the red mist ?? :D

Mr Pete, Dry ice to remove tar? Buy a 20 cent Chinese* heat gun and a 10 cent Chinese* paint scraper. Heat the sheeting and it comes off in layers like butter..

** perhaps in Europe I should be saying Bulgarian..
Transaxle Alfas Haul More Arse
User avatar
PietereQ
Platinum
Platinum
Posts: 477
Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL

Re: GTV6 Zender

Post by PietereQ »

Micke wrote:I threw mine away. Quite a lot of weight.
I have a small electric fan for the sake of rules. Weighs 600 g or so.
For visibility I use an anti fog chemical. Works fine.
If you don't mind spending the cash the best option is a heated windshield.
Great, I too thought of el. fan + chem combo, glad to see someone has already tried and it works.

MD, I finally ended with heat gun, yea and it's Chinese :D funny thing the old factory bitumen mats, were so hard
Ihad to use a chisel and a hammer, to get those buggers off. They came of in nice 2x2cm pieces... Just a few hours and a gargantuan back ache.
User avatar
Mats
Verde
Verde
Posts: 4059
Joined: Mon Nov 29, 2004 12:26 am
Location: Gothenburg, Sweden
Contact:

Re: GTV6 Zender

Post by Mats »

I'm not made from bitumen, still hard though... 8)
Mats Strandberg
-Scuderia Rosso- Now burned to the ground...
-onemanracing.com-
-Strandberg.photography-

GTV 2000 -77 - Died in the fire.
155 V6 Sport -96 - Sold!
User avatar
PietereQ
Platinum
Platinum
Posts: 477
Joined: Thu Jan 26, 2006 1:53 am
Location: PL/NL

Re: GTV6 Zender

Post by PietereQ »

Haha :lol:
Post Reply