ALFAGTV6.COM

Is anyone running E-85 and L-Jet on a 2.5 V6? Wondering how much work needs to be done, there seems to be some info on AlfaBB for 164 motors onward but nothing on the earlier motors. I'm thinking injectors with 30% increased flow rate and a wide band O2 sensor to monitor mixture. At this stage I don...

Greg Gordon wrote:When one bank is lower than the other, it's usually because cam timing is one tooth off on the lower bank.

Greg,
http://www.hiperformancestore.com
http://www.okinjectors.com

Fixed, one tooth out. Thanks.

A little bit late, but since I have this arb, well I guess Ill chime in. As you noticed the price is very nice especially if you consider that arb's for our cars are just a hollow pipe with two arms welded on both ends - not really a rocket science. The bars are hollow, adjustable, welds are quite ...

Thanks Greg, that does sound like the problem, the engine lost some power and started popping through the exhaust at idle... And so the process of elimination started. It's amazing how many issues you can find when you start looking... Over the last week it's been a bunch of 2%ers....popping still t...

Hi guys, Just compression tested the 2.5 V6 12 valve. Right Bank of cylinders: 1 185 2 182 3 187 Left Bank of cylinders: 4 165 5 160 6 162 Engine warm, 10 cranks, all plugs out. I think it's strange that one entire bank is lower than the other bank.. Causes? 1. Left Head thickness is greater than Ri...

Pity you were looking for that now as I just sold my original Autodelta Adjuster set plus 28mm bars . Now my kitten has nothing to chew on :D Your only option on torsion bars is from USA . Probably need 33mm solid if you want equivalent off 200kg springs ( linear ) up front . The only problem for m...

Mats wrote:Here's the epic suggestion: http://www.artracing.co.uk/parts-and-services/

Replica Autodelta adjustable torsion bar crossmember. Fits pre -82 body though... But it's aluminium!

Epic indeed!

Well I kind of let it go since it didn't say they are hollow. :| I can't imagine him gun drilling them and not mention it to be honest. Ok, I'm looking for a front 27 - 30mm bar that's adjustable, hollow is a bonus... RSR is the only choice at the moment other than Faster.se and Faster.se seem to b...

Mats wrote:I know the guy, I'll ask.

On the other hand, it doesn't say they're hollow anywhere.

Haven't heard back Mats, how'd you go?

N

Thanks for the quick reply, Jim, Mats indeed you are correct, I must have been reading about the hollow TB's

I have submitted an inquiry on the faster.se and will wait for a reply. If you hear back Mats pls let me know.

Cheers,
Nico

Has anyone used or know of the hollow sway 30mm sway bar that is made by http://www.faster.se

It seems reasonably priced.

Any reviews would be greatly appreciated.

N.

Have a pair of rear Alfetta GTV 6 red Adjustable Koni's in used condition.
$80

Located in Byron Bay

Cheers,
Nico

How'd these headers perform Jim? They look neat.

Nico