ALFAGTV6.COM

Jarle, did you finish the bike ITB's adaptation?
Could you tell us another bike models proper to donate their ITB's?

I checked the ground below the boot latch and it made no difference, so I got the board out and you were right, the mass contacts were loose. I welded them and now it works perfectly. Then I decided to do the same job with the other board and now it's better than ever

Thank you very much!!!

Thanks! I'll try that

After checking all the indicators and front and rear lights, I realised that the rear fog light is not working (my car has only one rear fog light). I checked the contacts with a polimeter and found that there are 7 volts (shouldn't be 12?), so I tried several bulbs (one pole 21W, one pole 5W, twin ...

Mcandiago, I have a 3-wire set in my gearbox and a 2-wire standard speedo on my GTV6 as Steve R said. I do have that amplifier from the 75/milano in a box waiting to be used, Can I plug all together and see my speedo working again then calibrate it? What should I do to make this work WITHOUT the dak...

Thank you both, guys!

Steve, how's the GTA brakes going? Send me a pm or e-mail so the topic doesn't change

C'mon guys!

I know I can substitute the GTV6 Speedo internals, but if don't do it,
What should I do to make my GTV6 understand the signal coming from that 75's amplifier/ECU?

Steve R, I have a 75 4.1 gearbox in my GTV6 too, I found an amplifier from a 75 (the black box under the car) and I'd like to make my Speedo run. What should I do with that device you say in addition to the amplifier? What should I do if I don't get the Dakota Stuff?

Check the wire to the Distributor, it's probably plugged in the reversed position!

Thanks Lenz!
A very clean and nice job!!!

I think everybody's thought about doing this modification in his car, but the fact is that I haven't found many info about the process. I'm interested in fitting rear calipers from a 155 or 147 and bigger vented discs matching the GTA fronts (I think the rear inboard discs could touch the DeDion tri...

Thanks Matt!!

Lenz, what BMW model does have that Brake master cylinder?

What's that clamp plate?

Does anybody know the stroke needed for the coilovers, both front and rear to suit the GTV6/Milano cars?

What about dampening rates?