ALFAGTV6.COM

Hi all, I have a '81 GTV6, and a recently rebuilt 3.0 engine by Alfa Import Centre in New York. I've experienced hesitation in the gas pedal, especially at low speeds / little gas ever since then, it has never run right and I've spent thousands of dollars with different garages trying to tune it or ...

I had all these issues, and they went away promptly after I put the ignition key on a relay. Because all these controls (windows, wipers etc) go through the ignition switch, it dfeteriorates over time and gives poor connectivity. Putting in a relay will give more juice to your applicances AND prolon...

Hey guys, After just having found fout my 5th steering knuckle has gone south, having looked virtually everywhere for one in as-new state and coming up with nothing, I was thinking that the technical life span of these things might be at an end for all of us. Seeing that the rubber part expands over...

In the past two years I've tried and tested 8 (eight!) steering knuckles on my gtv6, all broken in some way or another. I want a good one this time, and preferably new or rebuilt. If you have one, please let me know by email, removing the word 'alfa' from this email address: info@exceptalfa.nl (to p...

Just a little update. The shop that ended up doing it was Alfa Import center. Although expensive, they did a very good job. Because of the expense, and they charged extra fro the 3.0 AFM and computer, I couldn't put those in. It was cheaper for me to go with a GoTech system, and discard the AFM enti...

Found a cheap fuel pump new at centerline, also about $80, thanks for the ebay link though. I think the car should just get a very close look ... I'll get back to you on what we find out. I have felt, pulled and prodded almost every hose and connector in the bay but it doesn't help. Time to walk thr...

Hmm...
Its got all of greg gordon's vacuum hoses, all hoses are good, sealed and tight. No escaping air to hear. It basically got worse from one moment to the next, after the bump, not gradually.
Its not the inertia switch either.

Hey guys, Two months ago I did a 3.0 conversion on my 83 gtv6 with Alfa Import Center in Queens. They did a great job on the engine but ever since, when driving at a fixed speed or accelerating, the car tends to have uneven engine response. It was relatively minor at first, but when I hit a bump, it...

One or two decent quality interior lights wanted. Mine broke off for some obscure reason.

Am in the US, call me at 203 751 2375 or email at info at except dot nl . written out to prevent spam.

x-rad: We already have an engine. I just want to have some hints on what else would be beneficial. Enrique: They are the illustrious Ronal A1 wheels that came as an official option when buying the car. I didn;t have them (as you can see in my avatar they are not on my car back then), but got them of...

No, it's just about the engine... :) The rest of the car has been maintained in that fashion gradually. Rebuilt brakes, replaced most cyclinders (master, slave, brake), hoses, suspension, clutch, synchros, bushings, donuts, steering and so on, those are not the issue. All that is left now is the eng...

Hello fellow gtv6ers, I have an 83 2.5 gtv6 with a staggering 300k on the stock engine. Yes it still runs, and not too bad even. But, It's getting kinda rough and I've been dreaming about doing a 3.0 conversion for years. The body work is in near perfect shape. I don't have much money but I saved up...

With please

Hello fine friends, One upon a time in connecticut there was a restored gtv6 sitting under a tarp in the back fo a garden, lovingly cared for. Upon that same time the neighboring property hosted a construction company that dumped a load of large pebbels onto it. Ever since that time yours truly has ...

Hi Sam,

Thank you for your response.
This is from a '83 us spec GTV6. I have found the sensor wire coming out of the computer. It is broken off somewhere around the firewall area. I am unable to locate the heater connector wires...