ALFAGTV6.COM

I can concur w those dyno numbers. I got ~125HP,~125lb/ft from
my basically stock LJEt 2.5

JimL

Zambon, I'd go w the OEM wires. There is some superstition or perhaps truth that the wires have specific resistances. Also I don't know if you can get those super long boots from Magnecore. OT: I took the GTV6 out on Sunday for a 2-3 hour drive. It sounds great, gearbox is breaking in nice now. I ma...

What are you looking to get for the 82 GTV6 ?

Hey Zambon,

might want to throw your question out to Andy at Performatek:

Since he does do the LSD rebuild and conversion. He ought to know:

http://www.performatek.com/Alfa/Drive%2 ... rential%A0

Bests

Jim L

zambon wrote:I wouldnt wish that treatment on a Fiat Punto.
.

Hey. I drove a punto a few years back in France and it was a fine
little car. 1.3 petrol motor and all. It could (even) get out of it's own
way and handled nice. nice interior. Certainly as nice as a Ford
Focus.

bests

Jimmy

Howdy,

might want to start a new thread on this. I'd be very interested in the process
of preparing to run the Targa. I have a goal to run in the Targa in 2011. I know
that's a ways off, but so is my car. Any updates on your progress ?

bests

Jim L

Yeah. I agree 100%. A 27mm sway bar would rip straight off. My GTV6 has a 20mm front right now, so a 24mm seems like it would be a good step up but not so much that I rattle all the other suspension parts off. Addco can make a 25mm sway bar but I have never seen anyone on the boards who use it. It l...

I have both types. I got a set of the 81 GTV6 wheels as they are made of a lighter alloy than the later wheels. In the brochures they call it "Elektron" if I recall. Anyway the earlier wheels are definitely lighter. About 14 lbs vs the later aluminum ones are closer to 17 lbs. I've heard t...

Anyone done this, or have any good source for coilover adapter sleeves ? I'm wanting to stiffen up my front end a bit w/o going to huge torsion bars and sway bars. I'm thinking that coilover adapters and a Verde sway bar would stiffen the front up w/o ripping it apart. So I am looking for first hand...

Denoya trading is trying again to sell a $500 GTV6 for ~$4500.00. I was doing my normal Ebay search "alfa gtv6" and there were 3 pages of stuff today. whoa ! Well upon examination I see that it is all courtesy of rezdoc AKA Denoya Trading company. I've never purchased from them so no 1st h...

Hi Jes, thanks for the reply. I have owned the car for more than 3 years and have driven it on track numerous times the bad synchros. So I am able to double-clutch. I'm looking to make the car easier to drive though. Double clutching into the slow corners kills my time. I'm glad to have this skill, ...

Hello Alfisti, I have an 84 GTV6 2.5 that I've beaten the snot out of for the last 3 years. the 2nd gear synchro has been crunchy since I owned it. I've replaced the gear oil w Red Line a few times. Anyway this box is pretty tired. May need new bearings in addition to synchros. So it could be an exp...

205/55/15 definitely worth it. Could even go 205/50/15 although your speedo will be off. 17" wheels on these cars look cheesy. Also don't lower the front w/o lowering the rear. it will make the handling funny. I ran my car w just the front lowered for awhile and it handled very strange. One I l...

I just purchased a 75/Milano Verde gearbox. I currently have the original GTV6 4.11 box and diff on my 84 gtv6. I wanted the taller 2nd and 3 gears on the verde, but the 3.55 rea makes those gears really tall. I was very frustrated on track by my 2nd running out at ~54mph. The milano w the 3.55 howe...

Hi John,

I live in Denver too. I have an 84 black GTV6.
I've removed my AC compressor and other various AC
if you have need for any/all of it.

bests

Jim L