ALFAGTV6.COM

the smaller of the 2 hoses on my 87 Milano power steering unit started leaking today, sorry I dont know the technical name for the hose but I sure know it is leaking, checked most stores in my area and the web sight, no luck, any suggestions. Thanks for any help!

can someone help, my right turn signal is not working, bulb is good, the light flashes with the emergency flashers but not as a turn indicator, the left signal is working fine. Its too cold here in Michigan to use hand signals so Im making some people angry, any ideas? 87 Milano! THanks for the help

Well after cleaning all the connectors on the sender with no luck, and trying a spare sender, I replaced the connectors, it seems to be working fine although Im not sure if these cars will normally jump up over 200 degrees in stop and go traffic, Thanks for the help.

Hi Nick, thanks for the response, I tried a spare, it didnt help, any further suggestions, is it possible for the gauge to fail.

the temp gauge in my 87 Milano suddenly stopped registering, the car is new to me so any help would be appreciated. Kerry

What are the latest thoughts on the BMW guibos on the GTV6, I havent read much new on the subject, Im replacing guibos on my 82 GTV6, should I stick with the stock stuff. Thanks very much for the help! Kerry

Thanks Murray, I appreciate the help, I am having the heads done on this and will be putting new rings and bearings in as well, so you will probably see more questions from me in the near future. Do you have any suggestions on reasonable ways to bump up the power alittle on this stock 2.5, since the...

I could use some help please, I have my 2.5 engine ready to pull on my 82 GTV6, I have everything loose and ready, down to the motor mounts, I need help from the flywheel back, do I have to drop the driveshaft, I dont like the idea of taking the rusty exhuast off, this is the first time for myself a...

can anyone tell me if a gtv6 gas tank and a Milano tank can be interchanged! Thanks

I'm very close to pulling the 2.5 from my 82 gtv6 for a rebuild, is it best to unbolt the engine from the bellhousing or the driveshaft, I'm guessing the front guibo, I'm just learning, Thanks in advance!