ALFAGTV6.COM

I would of hoped that someone did do this Modification to fit a GTV6 bonnet to a 4 cylinder Alfetta GTV using the original firewall mount.
I know it's been done but cannot find info.

Hi to all,
Has anyone tried to fit a Alfetta GTV6 bonnet to an Alfetta GTV 4 cylinder body.
The fire wall mounting catch is way out. Has anyone done a modification bracket.

Hi to all, Just need some advice on the Alfetta GTV6 radiator , The Busso 3.2 runs great, I noticed that the radiator was leaking, I went to my local radiator repair shop, they stated that it needs to be recored. Before I get it recored is the standard Alfetta GTV6 radiator ok to use and compatible ...

Thankyou Davo

Hi Davo,
on the studs https://www.ebay.com.au/itm/22374101750 ... YOSNn913Cy,

Do you know the size of the ream or drill bit to use.


Regards

Thank you Davo, Thank you for your help.

Hi to all.
Does anyone know where I can get 10 longer front wheel studs.

Current standard ones are 55mm long from under the head to the end of the thread and I need them to be 5 mm longer.(60mm)

Hi to All, Just a question do all Busso V6 engines have the same firing order 1,4,2,5,3,6.

Hi Zamani, Yes you and Kevin are correct , I fitted a Haltech Elite 750 and had no issues. Their customer service is excellent when I requested information about the ECU before purchase they answered all my questions. Now I am getting close to finishing the GTV. :) When the car is finished and regis...

Hi Kevin , Yes I did talk to Domi and still have issues, I cannot believe that they cannot give me actual fuel base readings . My spark plugs are still good. The first issue I had was with the software batch fire programmed being incorrectly loaded between phase 2 and 3 being crossed. I have sent so...

Hi to all, I am having a lot of issues with my Gotech Pro X. I wired the ECU as per the manual. Found out that the batch firing Phase 2 and 3 software was crossed so the engine would not start and back firing through the throttle bodies due to it was firing batch phase 2 when it should of been Phase...

Hi Kevin. Could you please show me your settings on your mapping graph on the fuel and ignition on your car , My snap shot shows 2.44MS and yours shows 0.17MS. My engine is running so rich and its back firing at times. I think my settings are too rich. I cannot take the GTV to a dyno yet. I just wan...

Got the engine running ,

Just got to work out the idle on the Gotech Pro X ,
Will have to adjust the throttle positioning sensor.
Any advice would be great.

Hi Kevin, Thank you for the manual its going to help. Fantastic :) Would you have photos of your mapping for the fuel and ignition.EG refer photo attached I have fuel at 55 PSI going to the injectors but when I crank the motor it seems the injectors are not spraying. Electrical to the injectors are ...

To change the setting is a bit hard , I need to Know which keys to press.