ALFAGTV6.COM

Hi to All, Just a question do all Busso V6 engines have the same firing order 1,4,2,5,3,6.

Hi Zamani, Yes you and Kevin are correct , I fitted a Haltech Elite 750 and had no issues. Their customer service is excellent when I requested information about the ECU before purchase they answered all my questions. Now I am getting close to finishing the GTV. :) When the car is finished and regis...

Hi Kevin , Yes I did talk to Domi and still have issues, I cannot believe that they cannot give me actual fuel base readings . My spark plugs are still good. The first issue I had was with the software batch fire programmed being incorrectly loaded between phase 2 and 3 being crossed. I have sent so...

Hi to all, I am having a lot of issues with my Gotech Pro X. I wired the ECU as per the manual. Found out that the batch firing Phase 2 and 3 software was crossed so the engine would not start and back firing through the throttle bodies due to it was firing batch phase 2 when it should of been Phase...

Hi Kevin. Could you please show me your settings on your mapping graph on the fuel and ignition on your car , My snap shot shows 2.44MS and yours shows 0.17MS. My engine is running so rich and its back firing at times. I think my settings are too rich. I cannot take the GTV to a dyno yet. I just wan...

Got the engine running ,

Just got to work out the idle on the Gotech Pro X ,
Will have to adjust the throttle positioning sensor.
Any advice would be great.

Hi Kevin, Thank you for the manual its going to help. Fantastic :) Would you have photos of your mapping for the fuel and ignition.EG refer photo attached I have fuel at 55 PSI going to the injectors but when I crank the motor it seems the injectors are not spraying. Electrical to the injectors are ...

To change the setting is a bit hard , I need to Know which keys to press.

Hi Kevin,
These are my settings ,
My TPS is now 4.9
Can you see any of my settings that are inc and won't let my engine start?

Hi Kevin,
No ,I was told I don't need to,it runs 3 ignition batch phases under mode 4.
I have just wired it up and when I try to start the engine it back fires and won't start.

Do you know how the firing order is programmed .
Firing order on the Busso
1-4-2-5-3-6

Merry Christmas to all,
I am using the original Alfa coil packs on my V6 Busso.Firing order 1-4-2-5-3-6
Does anyone know how I can check if this firing order is programmed in my Gotech Pro X.

Hi to all,
At last I am coming close to finishing the GTV 3.2.
I am fitting the Gotech Pro X stand alone ECU.
Have been advised on the coil packs to only use the 2 pin that have a restintance 1ohm which are the outer pins straight 12+ power and ECU.

Hi Michael.
Great Video , Your car looks great.

Hi,
I am now connecting the heater and surg tank hoses to my Alfetta GTV 3.2 conversion .

Is it ok to use the fitting thats on the photo for the heater hose.

The surge tank hose will be fitted to the correct location.

Hi All,
I am after Alfetta GTV6 GP rear hatch wing. If you have one up for sale.

Refer photos