I would of hoped that someone did do this Modification to fit a GTV6 bonnet to a 4 cylinder Alfetta GTV using the original firewall mount.
I know it's been done but cannot find info.
Hi to all,
Has anyone tried to fit a Alfetta GTV6 bonnet to an Alfetta GTV 4 cylinder body.
The fire wall mounting catch is way out. Has anyone done a modification bracket.
Hi to all, Just need some advice on the Alfetta GTV6 radiator , The Busso 3.2 runs great, I noticed that the radiator was leaking, I went to my local radiator repair shop, they stated that it needs to be recored. Before I get it recored is the standard Alfetta GTV6 radiator ok to use and compatible ...
Hi Zamani, Yes you and Kevin are correct , I fitted a Haltech Elite 750 and had no issues. Their customer service is excellent when I requested information about the ECU before purchase they answered all my questions. Now I am getting close to finishing the GTV. :) When the car is finished and regis...
Hi Kevin , Yes I did talk to Domi and still have issues, I cannot believe that they cannot give me actual fuel base readings . My spark plugs are still good. The first issue I had was with the software batch fire programmed being incorrectly loaded between phase 2 and 3 being crossed. I have sent so...
Hi to all, I am having a lot of issues with my Gotech Pro X. I wired the ECU as per the manual. Found out that the batch firing Phase 2 and 3 software was crossed so the engine would not start and back firing through the throttle bodies due to it was firing batch phase 2 when it should of been Phase...
Hi Kevin. Could you please show me your settings on your mapping graph on the fuel and ignition on your car , My snap shot shows 2.44MS and yours shows 0.17MS. My engine is running so rich and its back firing at times. I think my settings are too rich. I cannot take the GTV to a dyno yet. I just wan...
Hi Kevin, Thank you for the manual its going to help. Fantastic :) Would you have photos of your mapping for the fuel and ignition.EG refer photo attached I have fuel at 55 PSI going to the injectors but when I crank the motor it seems the injectors are not spraying. Electrical to the injectors are ...