ALFAGTV6.COM

I will ask the “team” . Did this happen on GTV supercharge

Some good quality seat belts fitted. For MOT purposes even though not needed on this age car we fitted Race Safety Accessories Seat Runner Kit with light weight Alloy Seat Side Mounts.

Theo and I got a few hours in to fit the rear seat belt bar, seat belts and seats. As the Safety Devices roll cage is a basic it dose not have any seat belt bars. Following the MSA rules on seat belt angles the shoulder belts must be with 15 degrees of shoulder strap holes in seats. Good thing the G...

I have been trying to tidy up the exposed wiring in the cabin side side especially around consul and fuse box so I have laser cut some cover plates . The fuse box cover plate is mainly to hold it in position so you can unclip easy with out breaking back with roll cage in position . They must still b...

Generally we are not allowed any caps when on the track incase they come off and also all wheel nuts have to be visible. Always good to show your nuts off MD !!! . I do have some centre caps with an Alfa badge but yes needs to be finished . Another weekend and fluids, plug service will be good to go .

I made some new central jacking points made for low spoiler cars. What better place to try this out. A second hand 29mm anti roll bar fitted on new polyurethane rubbers along with new superfex castor arm bushes. Roll bar mounting points had to be welded up as the SA factory kinda missed spot welding...

Two second hand Corbeau seats were sourced at the Mini workshop next door for a small fee.

As luck would have it I located a second hand roll cage from CSR . It’s good enough for track days but can be upgraded at later stage if needed . Cage was sent in to be powder coated .

Some pics showing off the unusual looks and stance. Note 1cm rake from back to front. 17cm under rear jacking point and 16cm under front.

Hahaha Z, I will leave that for the guys down under . I will be more specific, some call him Md …..

The wheels are always an issue when you trying to find something within budget . Problem is there are very few suppliers a 4x 98 pcd and we wanted 16” as tyre availability is so much better than the 15” range . The only supplier who had an off the shelf wheel was Compomotive but the spigot would hav...

The store or should I say man cave ! George’s championship winning 75 hidden well under cover on left side.

Pics of shocks and springs

Luckily I had a spare new set of Bilstein coil overs that were custom made for me in SA quite a few years ago so after checking them on shock dyno and checking curves are all still good this would be used . The torsion bars would remain so this would be an assisted system . A 350lbs spring (62kg) pl...

Once the car was here in UK and all necessary custom work was done it could be taken to our rented lock up which sits on the neighbouring farm where Alex Jupe has his work shop. A few minutes up the road is CSR and Richard Melvin. As this is purely a hobby for Theo and myself most work is done on we...