ALFAGTV6.COM

solved
164 pumps work at 100bar, rack needs more, 75pump works at 130bar, so i had to replace the pump

i have extended the bracing in the enginebay to the front and castorballmounts in preparation of a 32mm (hollow) stabi (swaybar) https://lh5.googleusercontent.com/-_RyhkUTwK4Y/Ubit9u5WM4I/AAAAAAAABAw/SwsdUfzBPu0/s640/IMGP1292.JPG https://lh4.googleusercontent.com/-rST1vTVjZSs/Ubit-gZBCyI/AAAAAAAABAw...

for anyone interested, the steeringpump of an later model alfa(164) doesn't work well with an steeringrack of the 75, it cooks the oil and after a while the seals blow. turns out the workingpressure of the 164pump is 100bar, that of a 75 is 130bar! i have changed to a 75 unit at the cost of a consid...

last sunday we visited "viva italia" at the tt-circuit assen. lots of nice italian cars, also a few gtv's including 3(!) 3.0 24v's wich is probably about as much as you will get together here in holland http://www.alfaclub.eu/fotoalbum.php?aid=271 here a movie shot from a 24v http://youtu....

dank je.....

steal away.....
i've used aluminium rods wich are treadcut (?) on the ends. all is easely removed. actually , i did it before on the gtv turbo, it realy helps stiffening up. i still want to brace the frontbeam on wich the swaybar is mounted

the white rims aren't bad, but they are used quite commonly and weigh a ton, the speedline mistrals are 3pce, realy light and very rare...........and i like them better

i've tried the speedlines, on the rear they fit decently, but in the front a different solution is necessary, because the adapters give the wheels an ofset of 12 combined with the width of the rims, steering leads to scubbing the tires against the chassis https://lh4.googleusercontent.com/-mzU8Jchgw...

https://lh4.googleusercontent.com/-YUJwV4rKPpU/UZeAm5YZvPI/AAAAAAAABAA/T_2BFYuuuPM/s720/PICT9579.JPG https://lh4.googleusercontent.com/-9AgC2Sno4bE/UZeAybUrhqI/AAAAAAAABAA/YsjRelWtzvw/s720/PICT9582.JPG https://lh5.googleusercontent.com/-wDQOCU-WpV8/UZeA0x_yydI/AAAAAAAABAA/lxwUQuyqlks/s720/PICT9583....

hi guys, i'm using a steeringpump from a 164 in combination with a rack from a 75 now i have blown up nr3 pump due to heat build up in the oil, i'm fed up with it does anybody know what the source of the problem could be? i have installed an extra coolingspiral, so it has two, nevertheless after 15m...

horns can be obtained in hi-fi shops wich specialize in diy speakers, bass horns (just a thought) although they don't have the injector hole

yet another dutchman
welkom
nice ride, i love gtv6's in silver!!

lots of cars end up at the scrapheap also.......thats why 116's are getting pretty rare Welkom op onse forum . Kan u asseblief engels praat . Net die zuid Afrikaners wat verstaan . So you will have to translate into English so MD and Duk might have a clue :D Why is it the Dutch are so crazy about Al...

hi alex, i was planning to use speedline mistrals, but the wheel adapters (5x112<->5x98) need more work, so i still use momo racing rims....
maybe i'll buy a set of superturismo 17"

filling with epoxy is common practise in the bikeworld, check this http://mototuneusa.com/homework.htm
this is on bikes with>150hp/l!!!