ALFAGTV6.COM

Hi Kevin R, Would you have any photo's.

Regards

What is the widest wheels that can be fitted to the rear of an Alfetta GTV6.
I have 265 X 15' Simmons rims V5 that I want to fit on mine.
I might have to roll the rear guards.

The Blue GTV6 in the main above picture , Does anyone know the rear wheel size thats fitted to it.

It will be an aftermarket one, Most likely a Motec.

Regards

Thank you 105gta for the info,

Just confirming , The ECU will work with only the 3 pins magnetic field sensor readings.

I will try the 3 pin setup.

If you can attach photos it would be good.

Thankyou again

Regards

Hi 105gta,

This great info.

I do have the flywheel housing with the crank angle sensor hole.

Would you know what size the pins / bolts are that were used in the 3 locations.

Which model Alfa was this setup originally used on.

Thanks again 105gta for this info.

105gta,

I like your set up with the fly wheel,
Would you photos or diagrams of bolt locations on the flywheel.

Kevin, it would be great if you attach some photos .
Would you have details were I can purchase the trigger wheel + the sensor.

Regards

Thank you Jim,
I see if I can get one over here in Australia.

Regards

Hi to all,

I need some advice.

I am fitting a 3.2 24v Busso to my Alfetta GTV 4,(It's getting close to being completed )

I need to fit a crank angel sensor to the front of this engine.

Can you please confirm which crankshaft pulley I need ( Alfa Model) that fits the 3.2 .

Thanks

Ok,

Does anyone know the gap between the oil pump pick up to the lower part of the engine oil sump on a standard Alfetta gtv6.

I am using the third option sump Modification, Will use the original lower oil pan .

Thankyou Kevin,

Three good Modifications that can be done to the engine oil sump.

Would you know know the gap between the oil pump pick up to the lower part of the oil sump on a standard Alfetta gtv6.

I just need to do this mod and then I will fit the 3.2 in the Alfetta GTV.

Does anyone know the gap that should be between the oil pump pick up to the lower part of the oil sump.

Hi guys,
Starting to Do Modifications to the 3.2 to make it fit in the Alfetta GTV.

Has any got photos of the modification required on the lower engine oil sump aluminium plate.
It would be great to get some ideas.

Hi Jim,
I had been to a bolt supplier for the flywheel bolts and he has recommended Allen-head grade 5 titanium bolts, They are just under grade 12-12.9 .
Has any one used these bolts for mounting their flywheel.

Thanks Darryl, I am going to use a Motec ECU Hopefully I done have too much of a issue. I am having a bit of an issue with the flywheel bolts, i have fitted the flywheel with the 4 mm spacer and need 12Mx1.25 by 34mm long bolts. these bolts are very hard to get. Would you know any Alfa with these fl...

My Update , Just finished making the Engine mount extensions.
Just need to weld them.