ALFAGTV6.COM

Hey Duk , I'm also waiting for some answers on this . How must higher have you gone on top balljoint - 25mm ? How much did you bend the steering arms on hub or modify the pickup point ?

Hi Darryl , I will post some pics of sump showing where you need to cut to allow pump to clear . Also I put three studs in sump as this allows you to tight up front section below pulley so stop oil leak . You will under stand that when you get to that part . The sump holes at the rear need to be rea...

Z , on my calendar for good events is definitely Goodwood Members meeting which you don't have to be a member . This is normally weekend of 17th March . Then the huge Italian car day is Auto Italia day at Brooklands at end of April with over 5000 people attending . This generally a static gathering ...

More pics

More pics

More pics

Last weekend was Goodwoods 75th members meeting and as usual it was spectacular . I have been lucky enough to attend for last three years and absolutely amazed ( again ) of the driving skill of these guys . Ironically the only race Alfa won on the day was a supercharged straight Tipo B P3 . Hopefull...

One areas that took me ages was putting the window cable mechanism in especially when I had no cable length to work off . It was a lot of trial and error fitting as you have to be within 20mm on the 3m length otherwise you can't tension the cable on the door to test it . I used the aluminium head of...

The guys do have fun here in SA . Here some pics taken by Paul Blackburn from this weekends Alfa Trofeo challenge . Check out the black stripes the twin turbo GT left on the tarmac

Got sent some nice pics from AutoItalia from Octobers event which I thought I would download here . Gonna aim to get car to their test track day at Longcross next month where there are no noise restrictions .

Thanks Murray . These cars definitly won't rust due to salts on roads , cold and dampness however their is quite a lot of dust in the air which over long periods of time block up the cills . That combined with water even in best condition will start to corrode but if these cars are maintained with w...

Cheers thanks ! If I had a full week and few spare grand at the moment I could finish it off . if If If ...... However My dad has fetched the seats and front door pannels which have all been done to identical pattern with the vinyl purchased at Classic Alfa UK . I would really like the bumpers to go...

Thanks goodness my original door rubbers were still good as its huge restorers nightmare of getting doors to shut properly with new rubbers . But fitting 105 door rubbers is a serios test of patience which took me ages as it fits into a double channel unlike the simple 116 cars . sa started test fit...

Before the dash was put in I had to check the heater mechanism cables were functioning , pipe work drainage from scuttle was connected and ventilation ducting in place as its a real tester on the back if you try do it afterwards .

I got the dashboard back and it's the first time I have actually seen a proper job on a totally cracked up dash . The guys who did it for me specialise in modern accident damage dashboards and airbags for the luxury German cars and they have an ISO 9001 cert which is atleast better from the previous...