ALFAGTV6.COM

ok im stumped .....couldnt find a better place to post it so here it is

ive got a milano column sitting here for the "project" and i have a grant signature series wheel....

now the problem..grant does NOT make a steering wheel adapter for milano's..they do however make one for early fetta gt's and another one for the gtv6 6501 and 6502

so the question is...does a milano steering shaft at the steering wheel have the same splines and taper as a gtv6 or a fetta gt?......

i dont care about the outward appearance matching with the column plastic as i wont be using any of it.....

Two choices:

Try an Alfetta wheel on a 75 spline or
Fit an Alfetta steering colum instead- gotta be worth next to zip anyway.

MD wrote:Two choices:

Try an Alfetta wheel on a 75 spline or
Fit an Alfetta steering colum instead- gotta be worth next to zip anyway.

Gees ! Finally ! A constructive post ! hehe....... yup,agree here totally..

hmm ya know...i totaly forgot i have a old fetta wheel around here i can try ..wonder where i stashed it

i dont want to change out the column...i like the milano tilt/tele setup...and i can cut it down to a nice slim setup to slip into a steel tube

I'm pretty sure there is a MOMO adapter for both the 75 and GTV6 so I think the 75 adapter would be ok.

well a momo 6bolt wont help me with a grant 5 bolt wheel :p

dug out my old fetta wheel from the rotted out 99cent alfetta gt that i draged home last year..and it was a PERFECT fit to the splines on the milano shaft

soo now its got me wondering..so i measured the gtv6 column and the fetta wheel and theres about 1 inch of differance in the size .....so my guess is that a GTV6 adapter is wider to match the column and the fetta is narrower to match its smaller column....guess i con the local shop into ordering both so i can see which one i find more sexy!

No, what I'm saying is the MOMO GTV6 adapter fits the 75, so a Grant GTV6 adapter would probably fit the 75.

ohh ok cool i wasnt catching it lol