Page 1 of 1
Will 164S wheels fit on Milano?
Posted: Mon Jun 13, 2005 8:22 am
by Carl Friedman
Bolt pattern is apparently the same. Will offset be an issue? Also, will hub opening fit, was told the 164 hub opening is smaller than Milano.
Posted: Mon Jun 13, 2005 9:10 am
by SamW
Slightly more offset than original, they will work if you bore out the center just a bit, I have heard it is not much. I have seen 164s wheels on a GTV6.
Posted: Mon Jun 13, 2005 11:56 am
by Murray
Carl they fit just fine>i use 164S wheels for my track tires and they are excellent - light and strong.As Sam said the only mod is you have to take a Dremel to the center-bore I can't recall the difference but the 164 is slightly smaller.Takes a couple of minutes per wheel.Offset is fine.
Thanks gents
Posted: Mon Jun 13, 2005 1:55 pm
by Carl Friedman
I'm new to Alfas, been doing Fiats for last 20 or 30 years. Mine is a Milano gold with 5-speed and is dead stock except euro down pipes which previous owner fitted....which is why it probably just flunked emissions....no cat.
Friend with 164S is selling his stock wheels and I'm interested, at least now I know they fit.
Posted: Mon Jun 13, 2005 10:38 pm
by Mats
58.6mm on the 75, 58.1mm on the 164. So 0.5mm difference.