ALFAGTV6.COM

Hi!

I am currently building a MS2 (V.3) for my 75 (milano) 3.0 Motronic.

I see there is a diagram which shows how to connect the pins on the db37 to the existing L-jet harness. Is there a diagram that shows how to connect the db37 to the existing Motronic harness?

What are the differences (in harnesses) between L-jet and Motronic? (Fuel pump etc?)

Thanks for all replies!

i don't belive that the pinout of the l-jet and the Motronic ML 4.1 is the same....i will look at home if i can find a pinout of the connector..

enzo wrote:i don't belive that the pinout of the l-jet and the Motronic ML 4.1 is the same....i will look at home if i can find a pinout of the connector..

That would be very kind of you! It would help me alot with the wireing!

Anyone got a diagram showing the pinout of the connector? There must be someone who has MS-converted their Motronic (164, 33, etc)?

Btw, anyone have experiences using the stock (motronic) hall-sensor and toothed wheel with MS2?

http://www.alfabb.com/bb/forums/showthread.php?t=21359

Try the thread on this link. There is a post with a PDF to download.
Hope this helps
James

zambon wrote:http://www.alfabb.com/bb/forums/showthread.php?t=21359

Try the thread on this link. There is a post with a PDF to download.
Hope this helps
James

Thank you VERY much!!