Page 1 of 1
Cooling fan electrical noise.
Posted: Wed Feb 23, 2005 8:40 pm
by Mark Mallett
Just ordered a MS kit from Glen's Garage to install on one of my 87 Milanos. Reading through Steve R's GTV6 MS installation page I came across his mention of using magnetic chokes on the radiator fan leads. Does anyone have suggestions on type (possibly part numbers) to use?
Mark
Posted: Thu Feb 24, 2005 12:16 am
by David
Mark,
Have a look at this link. It will give you some idea of what to ask for. These seem to do the job and fit the fan cables well,
http://www1.jaycar.com.au/productView.a ... &SUBCATID=
David
Posted: Thu Feb 24, 2005 10:12 am
by Steve R
They look very similar to the ones I used, should do the trick fine - Also clean the terminals in the connectors for the fans, that helps too....
Posted: Thu Feb 24, 2005 8:13 pm
by Mark Mallett
Thanks David, this gives me a clear idea of what I am looking for.
Will clean the contacts as well while I'm at it Steve.
Found these at mpja.com part number: 15566 FL
Blocks noise. Frequencies from 10MHz to1GHz
Mark