ALFAGTV6.COM

Posted: **Mon Jul 28, 2008 12:26 pm**

Does anyone have the correct temp/ohm values for use with Easytherm? Sensors are stock Bosch.

/Marcus

Posted: **Mon Jul 28, 2008 2:38 pm**

Marcus ,
If you use the following values everything will work as required.

-10 deg.C- 9500 ohms
+20 deg C -2500 ohms
+80 deg C- 350 ohms

Posted: **Tue Jul 29, 2008 12:37 am**

Thanks, Murray! I'm going for a first startup-attempt later today

Bosch IAT and CLT sensor values?