Page 1 of 1

New GTV6 Owner

Posted: Mon Nov 12, 2007 2:09 am
by swescott
Hi Guys

Just new to this model, but love the sound and the drive.

Down in Sunny Melbourne Australia. Would love to know if there are any good sources of door rubbers etc for restoring some of the worn ones in my car.

Catch ya

Shane

Posted: Mon Nov 12, 2007 3:50 pm
by x-rad
welcome to the club.....and so begins another saga of endless searching for the part you need.....

BEST OF LUCK! She is a beaut!

Posted: Mon Nov 12, 2007 8:45 pm
by Alfettish
I'll swap your bodykit for some rubber.

Posted: Tue Nov 13, 2007 1:45 am
by MD
swescott,

Welcome to the forum. Here's a place at your front door step and looks like it's run by your in-laws :D :

http://www.scottsoldautorubber.com.au/

It may be possible to get an exact Alfa seal but more likely, you may need to have a profile in mind and then match it with some generic types that are as close as possible.

If that's no good, try a Queensland outlet :

The Rubber Shop, 148 South Pine Road, Enoggera, QLD 4051
Tel 07 3354 2053 and ask for Bill Ryan.

Cheers, MD

Posted: Tue Nov 13, 2007 4:47 am
by ALFA GTV6 GP
swescott,
Nice car you have there! full Zender kit looks identical to my old car ?
Do you know if it came from W.A. and is that a 85 model?
Cheers John

Posted: Tue Nov 13, 2007 10:29 am
by mjr
very tidy.looks nice in white. all weather seals are available here

http://www.highwoodalfa.com/alfa%20rome ... lfetta.htm

Posted: Tue Nov 13, 2007 10:57 am
by Barry
MD wrote:swescott,

Welcome to the forum. Here's a place at your front door step and looks like it's run by your in-laws :D :

http://www.scottsoldautorubber.com.au/

It may be possible to get an exact Alfa seal but more likely, you may need to have a profile in mind and then match it with some generic types that are as close as possible.

If that's no good, try a Queensland outlet :

The Rubber Shop, 148 South Pine Road, Enoggera, QLD 4051
Tel 07 3354 2053 and ask for Bill Ryan.

Cheers, MD
Hey,Ar`nt you a bit old too be worrying about rubbers??
I got a "almost new" Zimmer for you....ally as well,so wont strain yer muscles..haha!

Talkin Zender..check out my avitar..I loved the Zender kit..

Posted: Tue Nov 13, 2007 12:32 pm
by mjr
what happened to that GTV barry? I love it, its a real brute.

white gtv6's look really good, it kinda makes them look modern and edgy..

Posted: Tue Nov 13, 2007 1:11 pm
by MD
Hey Bazza,

Your ears must be painted on. You listen but you don't hear too well for a young fella. If I told once, I told you a dozen times :

REAL MEN BURN RUBBER !! :D

Thanks for the info

Posted: Sun Nov 25, 2007 12:12 am
by swescott
Hi Guys

Thanks for the links and info on rubbers. should help me heaps. The car is a Jan 86 manufacture.

Not sure if it is from WA or not. The guy I bought it from said it came from Doncaster in 2001 but didnt know the rest of the history.

Thanks again guys.

Thanks for the info

Posted: Sun Nov 25, 2007 12:13 am
by swescott
Hi Guys

Thanks for the links and info on rubbers. should help me heaps. The car is a Jan 86 manufacture.

Not sure if it is from WA or not. The guy I bought it from said it came from Doncaster in 2001 but didnt know the rest of the history.

Thanks again guys.