75 TS 3.0 V6 24v project

Please post a pic of yourself or your car tell us about yourself and let us know where you are from.
Post Reply
Jelmer75
Silver
Silver
Posts: 3
Joined: Fri Nov 20, 2015 3:56 am
Location: The Netherlands

75 TS 3.0 V6 24v project

Post by Jelmer75 »

I'm Jelmer from the Netherlands and I'm putting a 3.0 V6 24v in my 75 TS.

Image
The 75 is fitted with Merwede springs, Gaz shocks, polyurethane everywhere and a 27mm torsion bar. I didn't do anything about the front ride height because the V6 will change this.

The "new" engine:
Image

And a donor 75 2.5 V6 that I bought for the sump, tail piece, flywheel and therostat housing:

Image
Image

I ordered a lot of new parts for the swap but I still need some used parts like the coolant "T"'s that a 75 V6 uses, a Motronic pulley and the brackets for the alternator and power steering pump. I anyone has these parts, please let me know
'87 75 T.S 3.0 24v swap
'84 Nissan Patrol 2.8i
'76 BMW 528

User avatar
Giuliettaevo2
Verde
Verde
Posts: 783
Joined: Sun May 08, 2005 11:56 pm
Location: Netherlands

Re: 75 TS 3.0 V6 24v project

Post by Giuliettaevo2 »

Hè Jelmer, Welkom hier. :wink:

Why don't you use the 24v pulley? Make some brackets and use the 164 ancillaries like ps-pump and alternator.

If you then get the 2.5 flywheel balanced to the same unbalance as the 164 flywheel it's fine. Get the flywheel lightened at the same time.

Greetings Remco
Drive it like you stole it...

Jelmer75
Silver
Silver
Posts: 3
Joined: Fri Nov 20, 2015 3:56 am
Location: The Netherlands

Re: 75 TS 3.0 V6 24v project

Post by Jelmer75 »

Remco,
I might just do that because I already have the 164 alt and ps pump and the alternator is high amp.
The 2.5 flywheel is already lightend so that is a plus. What company in Holland is a good adres to have it balanced? Technotrans?
'87 75 T.S 3.0 24v swap
'84 Nissan Patrol 2.8i
'76 BMW 528

User avatar
Giuliettaevo2
Verde
Verde
Posts: 783
Joined: Sun May 08, 2005 11:56 pm
Location: Netherlands

Re: 75 TS 3.0 V6 24v project

Post by Giuliettaevo2 »

They should be able to help you.
Drive it like you stole it...

kevin
Verde
Verde
Posts: 2762
Joined: Sat Jan 22, 2005 9:09 am
Location: Esher, UK

Re: 75 TS 3.0 V6 24v project

Post by kevin »

Good luck on the project and keep the pics coming . A mate who I work with has just finished his 75 24v 3.2 . Here some pics to keep the motivation going on yours .
Attachments
image.jpg
image.jpg (214.64 KiB) Viewed 3243 times
image.jpg
image.jpg (238.7 KiB) Viewed 3243 times
image.jpg
image.jpg (153.65 KiB) Viewed 3243 times

Jelmer75
Silver
Silver
Posts: 3
Joined: Fri Nov 20, 2015 3:56 am
Location: The Netherlands

Re: 75 TS 3.0 V6 24v project

Post by Jelmer75 »

Thanks! I have a Megasquirt for it to put on in the future and I'm going to make my own exhaust manifolds like the CSC style.
'87 75 T.S 3.0 24v swap
'84 Nissan Patrol 2.8i
'76 BMW 528

Post Reply