ALFAGTV6.COM

How the heck do you get that crudy varnashy crap of the valves.
tried soaking it in super hot water mixed with heavy duty machinery degreaser( I swear I heard one of the valves laugh at me)

Got a bench mounted electric wire brush?

You're right. I think I heard a little snigger myself.

Jose I had great luck with combustion chamber cleaner.It usually comes in an aerosal can.What I did was spray the whole can into a coffee can and soak the valves for a couple of hours.After that I was able to remove most the crud with a toothbrush (my wife's )This also worked well for my pistons.Be sure to inspect your valves very carefully once they are clean.Use a magnifying glass and pay particular attention to the exhaust valves.You're looking for hairline cracks which usually radiate in from the outside edge.Not uncommon.

Thanks guys. I'm going to try the chem. way first if that don't work I'm hitting the wire wheel.

I use a rotating wire brush on either a bench grinder or an electric drill. That works very well.
Greg Gordon www.hiperformancestore.com

I hear em too Jose I...........! ,

wire brush an drill shut em up!