GTA crank and piston cost?
Posted: Fri Aug 25, 2006 3:17 pm
How much does a GTA crank and the piston set cost?
Page 1 of 2
Posted: Fri Aug 25, 2006 8:31 pm
and rods, we want the rods.
Posted: Fri Aug 25, 2006 8:39 pm
The rods are the same as all V6s. Only change is, the newer V6s are "better" because of newer casting design.
Posted: Sat Aug 26, 2006 10:36 am
Zamani I am PMing you.
Posted: Mon Aug 28, 2006 11:51 am
Is it possible to send out the 3.0 crank to a shop to increase the stroke? Has anyone done so?
Posted: Mon Aug 28, 2006 12:01 pm
It's possible but you do NOT want to know what it costs.
GTA crank price
Posted: Thu Aug 31, 2006 10:13 am
I asked a Swedish dealer (Alfa Rosso) about the price for a GTA crank.
15430 SEK + tax or 1670 Euro or 2140 USD.
/Sud_Oscar
15430 SEK + tax or 1670 Euro or 2140 USD.
/Sud_Oscar
Posted: Thu Aug 31, 2006 3:13 pm
this is an issue I am trying to get over, either I bite the bullet and get the GTA crank or I go the turbo route. I have the gta pistons and cams but no crank.
I can extract a lot more power through the turbo way rather than with the gta crank. And the cost will probably be comparable as long as I dont want to run high boost.
I can extract a lot more power through the turbo way rather than with the gta crank. And the cost will probably be comparable as long as I dont want to run high boost.
Posted: Wed Sep 13, 2006 8:14 am
price crank 811 euro
rod 79 euro
piston plus cylinder 120 euro
plus 21%taxes for gta !!
rod 79 euro
piston plus cylinder 120 euro
plus 21%taxes for gta !!
Posted: Wed Sep 13, 2006 8:34 am
That's not a bad price!
Posted: Wed Sep 13, 2006 10:39 am
it is a super price!!! 
Posted: Wed Sep 13, 2006 12:44 pm
Hey RZ, how much for a set of GTA cams?
Anyone know the differences between these and a '95 164 24v set ?
Anyone know the differences between these and a '95 164 24v set ?
Posted: Wed Sep 13, 2006 2:23 pm
don't know that price!but i think cams only will not do the job!
you need exactly the same setup and pistons to have an optimal result.
just quoted these prices because i was interested in a conversion to 3,2 ,but with a 12v head i think the result will not be satisfying for me.
pistons are made for 24v heads
you need exactly the same setup and pistons to have an optimal result.
just quoted these prices because i was interested in a conversion to 3,2 ,but with a 12v head i think the result will not be satisfying for me.
pistons are made for 24v heads
Posted: Thu Sep 14, 2006 6:18 am
RZ :rz wrote:price crank 811 euro
rod 79 euro
piston plus cylinder 120 euro
plus 21%taxes for gta !!
Tell me:
Were (who) that price come from ?
Posted: Fri Sep 15, 2006 12:05 am
www.tuynder.nl
this man has everything for alfa romeo,fiat,lancia,some maserati;(new parts)
at about 50% of the normal price
they speak english and will send everything everywhere.
and i don't have any shares in this company
this man has everything for alfa romeo,fiat,lancia,some maserati;(new parts)
at about 50% of the normal price
they speak english and will send everything everywhere.
and i don't have any shares in this company