Page 1 of 1

valve clearances???

Posted: Fri Oct 13, 2006 1:27 pm
by benski105
hi all, im about to adjust the valve clearances on my GTV6.
iv never done it before and was wondering if the factory recommended clearances are to be followed or can i tighten them up a bit.
i have owned 105 cars before and have always run slightly tighter clearances so as to quieten the engine down a bit.
can i safely do this with a gtv 6 aswell
any thoughts or suggestions would be appreciated.

also, is there anything else i should do, aside from the usual tune up/maintenance things, while im on my bonnet open 'make the car good' spree.

cheers

ben