Post Reply
Oversteer
Silver
Silver
Posts: 46
Joined: Fri May 05, 2006 4:05 pm
Location: Oporto, Portugal

EVO set up

Post by Oversteer »

Hi Guys!

I've noticed that the EVO AFM setup is different from the other Turbos' and I was thinking of converting my America to that setup in order to eliminate that ugly bend between the turbo and the AFM, and to change the big air filter box to a cone or foam direct filter.

Just by looking at some pictures, two issues crossed my mind:

- the sleeve next to the turbo is much smaller in the EVO
- the "mouth" of the AFM is square sectioned, and I can't see a cone filter attached to it easily

Any thoughts, guys?

Thank you in advance.

Regards
Alexandre
Alfa Romeo... some people just polish them, some people know better!!
Top
Oversteer
Silver
Silver
Posts: 46
Joined: Fri May 05, 2006 4:05 pm
Location: Oporto, Portugal

Post by Oversteer »

Problem solved!

Samco hose between turbo and AFM, and GTV V6 TB AFM adapter ti circular section!

Now, I've just need to work out the type of filter to go for.
Any ideas?
Alfa Romeo... some people just polish them, some people know better!!
Top
Post Reply

Return to “Engine”