Post Reply
User avatar
zambon
Verde
Verde
Posts: 549
Joined: Sun Apr 03, 2005 8:01 pm
Location: Northern Wisconsin

locking crowns on main bearing caps

Post by zambon »

I pulled my oil pan off of my 3.0 verde block that I hope to install soon and I noticed that the machinists that assembled it did not use locking crowns or locking tab washers on the main bearing caps. I have a spare parts 2.5 block with lock crowns and tab washers and I am wondering if I should use those parts on my 3.0.
Some say that alfa put them there for a reason, others have told me that they would never re-use hardware like that, they would only install new pieces.
Does anyone have an opinion they could share?

Thanks
User avatar
zambon
Verde
Verde
Posts: 549
Joined: Sun Apr 03, 2005 8:01 pm
Location: Northern Wisconsin

Re: locking crowns on main bearing caps

Post by zambon »

Currently planning to use the crowns from the 2.5 unless someone thinks that it's a bad idea.
gtv-racer
Platinum
Platinum
Posts: 256
Joined: Tue May 12, 2009 12:02 pm

Re: locking crowns on main bearing caps

Post by gtv-racer »

My 3.0 didn't have them. So i rebuilt the engine without them. I get the feeling some v6 engines have them and some don't... :|
Post Reply