smukc
Silver
Silver
Posts: 11
Joined: Thu Aug 07, 2014 4:38 am
Location: Slovenia

Re: v6 3.0 12v rebulid and mild tuning

Post by smukc »

Just recieved NEW oil pump from OKP and i am shocked realy bad casting housing full of holes... :shock:
here are some pictures:

Image

Image

the guy from OKP said that this is ok...

What do you guys think ?
MR2 Zig
Verde
Verde
Posts: 766
Joined: Tue Jun 13, 2006 9:47 pm
Location: Fresno, Ca.
Contact:

Re: v6 3.0 12v rebulid and mild tuning

Post by MR2 Zig »

As long as there isn't anything that can come out of the pits, its good to use. It isn't as efficient as it could be, but you won't be able to measure that difference.

I hope that helps,
Scott
MR1 Zig (I made rate!)
Machinery Repairman USNR
cizeta
Silver
Silver
Posts: 1
Joined: Mon Feb 22, 2016 6:36 pm

Re: v6 3.0 12v rebulid and mild tuning

Post by cizeta »

Sorry smukc, but I wouldn't put that oil pump in my engine, and I sure as hell wouldn't put it in your engine. I have built quite a few alfa engines, and this pump simply isn't up to factory specs. If you can't return it, you might be able to get a coating company to coat the pump and internals with an anti-friction coating. This is assuming that all the other clearances in the pump are o.k. As has been mentioned, the actual effect on measured oil pressure will not be noticeable, but you don't know what other unseen flaws the pump has.
Post Reply