Post Reply
User avatar
junglejustice
Verde
Verde
Posts: 624
Joined: Fri Nov 26, 2004 1:19 am
Location: Granolaville, WA

Aahhhhh... Thanks Michael!

Post by junglejustice »

Feels good to have an official home here on the TA for these sweet little units!

For 700 to 900 bucks (STandard or Pro) including a nice new wiring harness WITH brand new Alfa-style connectors to the injectors, engine temp, air temp sensor etc, you can't beat the simplicity of installing one of these and starting the car right up!

I will be bring about 5-6 more units back from South Africa with me in about 3 weeks...
...to Alfa, or not to Alfa? That is the question...
User avatar
ar4me
Verde
Verde
Posts: 645
Joined: Fri Dec 03, 2004 9:55 am
Location: Southern California

Post by ar4me »

I'm about to put a standard on my verde - waiting for new rubber sleeves and paper gaskets (since it is apart). But, it does appear pretty straightforward - we'll see if it fires right up. Only catch could be to adjust the timing one direction or the other with a fixed value (our starting points are different it seems). Also, I will be looking into putting it in closed loop with the O2-sensor once I have the basic setup running.

JJ, similar to megasquirt you need a thread with success stories - start with your own.

Jes
87 Milano Verde - daily driver - Juliet
87 Milano 3.0 Motronic - budget race car - Roxanne
87 Milano 3.7 24v - race car
(Repeat or do as I say at your own risk - be critical)
Post Reply