Post Reply
User avatar
Mezevenf
Platinum
Platinum
Posts: 231
Joined: Sat Aug 13, 2005 2:52 am
Location: Gold Coast, Australia
Contact:

Wiring to VR6 pack

Post by Mezevenf »

Hey all,

I have run into a problem,

We have 4 loose wires coming from the Gotech, but not sure in what order they are plugged into the VR6 coil pack. The wires are yellow, green, orange and purple. Anyone got a picture of how these are meant to be plugged in? Wiring diagram would be very helpful.

Would like to get this done ASAP, I wanna start it :D

Thanks in advance.
Bernard M (AKA Mef - Mezevenf)

1986 75QV 3.0L 24v V6 - Silver
1985 GTV6 2.5L 12v V6 - Red
1999 166 3.0L 24v V6 - Red

NightSpec
User avatar
fedezyl
Verde
Verde
Posts: 645
Joined: Wed Jun 01, 2005 2:45 pm
Location: Montevideo, Uruguay

Post by fedezyl »

I think JJ posted a wiring pic from a VR6 coilpack a while ago, it was in one of my threads
User avatar
Mezevenf
Platinum
Platinum
Posts: 231
Joined: Sat Aug 13, 2005 2:52 am
Location: Gold Coast, Australia
Contact:

Post by Mezevenf »

Found the pics but the wires are a different color.

Confused, wanna get the car started today!
Bernard M (AKA Mef - Mezevenf)

1986 75QV 3.0L 24v V6 - Silver
1985 GTV6 2.5L 12v V6 - Red
1999 166 3.0L 24v V6 - Red

NightSpec
User avatar
Mezevenf
Platinum
Platinum
Posts: 231
Joined: Sat Aug 13, 2005 2:52 am
Location: Gold Coast, Australia
Contact:

Post by Mezevenf »

S'cool, its running. Got it sorted.
Bernard M (AKA Mef - Mezevenf)

1986 75QV 3.0L 24v V6 - Silver
1985 GTV6 2.5L 12v V6 - Red
1999 166 3.0L 24v V6 - Red

NightSpec
User avatar
fedezyl
Verde
Verde
Posts: 645
Joined: Wed Jun 01, 2005 2:45 pm
Location: Montevideo, Uruguay

Post by fedezyl »

cool mate! is it too hard to get it wired? I think I might put the engine in next month..
User avatar
junglejustice
Verde
Verde
Posts: 624
Joined: Fri Nov 26, 2004 1:19 am
Location: Granolaville, WA

Post by junglejustice »

VR6 coil-pack hook-up...
Attachments
HPIM0998.JPG
HPIM0998.JPG (38.39 KiB) Viewed 9667 times
HPIM1002.JPG
HPIM1002.JPG (56.5 KiB) Viewed 9668 times
...to Alfa, or not to Alfa? That is the question...
User avatar
4agedub
Silver
Silver
Posts: 35
Joined: Thu Jul 21, 2005 7:02 am
Location: Johannesburg RSA
Contact:

Post by 4agedub »

The Golf VR6 coil pack can be used in one of two ways...

1. It has got a built in ignition module as in the picture. Then you use 12v+ ; Signal 1; Signal 2; Signal 3 ; Earth. Gotech must be switched to external fire for this option.

2. You can remove the ignition module, switch the Gotech ecu to internal fire 12v+ ; Signal 1; Signal 2; Signal 3.
Gotech fuel injection systems
South Africa
Tel: +2711 3978197
Email: louis@gotech.co.za
Image
Post Reply