Guys:
Any recommendations on which brand of FPR to use? I assume I need a 3 bar FPR - probably an adjustable one?
This is for a Glenwood 24v engine running Gotech Pro with GTA injectors.
Thanks,
Fuel Pressure regulator / damper?
Michael
1981 GTV6
1981 GTV6
Mike,run the std Alfa (bosch)fpr....Gta injectors are big and will work at std fuel press..
Traced bracket..goeie ou poskantoor..will mail you..
Traced bracket..goeie ou poskantoor..will mail you..
French cars are shit and shit expensive to service and bloody awful and unreliable and expensive and friends don't let friends drive french cars and you wait years for parts.
Michael,
We used the 3.7 setup on my 3.2 GTA (which we incidently just finished this past weekend with dyno tuning Friday and Saturday - I trailered it down this Sunday/Monday - it made 246 SAE RWHP). It is an adjustable fuel pressure regulator that I got from Jeg's - threaded a little pressure gauge into the regulator. That way you can always read the fuel pressure, making engine debugging a bit simpler. I can post a pic later tonight if you like.
Jes
We used the 3.7 setup on my 3.2 GTA (which we incidently just finished this past weekend with dyno tuning Friday and Saturday - I trailered it down this Sunday/Monday - it made 246 SAE RWHP). It is an adjustable fuel pressure regulator that I got from Jeg's - threaded a little pressure gauge into the regulator. That way you can always read the fuel pressure, making engine debugging a bit simpler. I can post a pic later tonight if you like.
Jes
87 Milano Verde - daily driver - Juliet
87 Milano 3.0 Motronic - budget race car - Roxanne
87 Milano 3.7 24v - race car
(Repeat or do as I say at your own risk - be critical)
87 Milano 3.0 Motronic - budget race car - Roxanne
87 Milano 3.7 24v - race car
(Repeat or do as I say at your own risk - be critical)